field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

The world of aircraft maintenance is constantly evolving. Are you not afraid to handle drone inspections, AI simulations, and work with boroscopes? Come work at Europe's largest Embraer MRO! Welcome to Regional Jet Center As an Aircraft Maintenance Technician, no day is the same: from scheduled maintenance in the hangar to technical support at Schiphol Center or Quick Response Team missions to outstations in Europe. Being able to switch quickly is important. Fortunately, you are never alone in a team of around 170 colleagues, and there is a solution for every challenge. As an Aircraft Maintenance Technician, you are responsible for independently performing all repair and modification activities and releasing the work performed, both by yourself and the team assigned to you. In addition, you are also responsible for: <ul><li>Leading mechanics and supervising the work performed</li><li>Independently performing inspections, troubleshooting, repairs, and modifications</li><li>Carrying out administrative tasks in accordance with aviation regulations</li><li>Shared responsibility for the technical punctuality and availability of the aircraft at Schiphol Center, Schiphol East, and European outstations.</li></ul> If you want to work as an Aircraft Maintenance Technician with us, we require the following from you: <ul><li>Completed relevant education (for Dutch people: MBO level 4)</li><li>Possession of Part 66 AML B1.1 or B1.1/B2 Aircraft Maintenance License</li><li>Aircraft type training is an advantage</li><li>Knowledge of EASA laws and regulations</li><li>Experience within an aircraft maintenance environment</li><li>Good command of the English language in both written and spoken forms.</li></ul> What can you expect from us? In addition to a challenging role within Europe's largest MRO for Embraers, we also offer you: <ul><li>A base monthly salary of €3.603 to €4.846,-</li><li>Irregularity allowance of approximately €800 per month</li><li>Year-end bonus, annual profit sharing, annual holiday allowance, and travel allowance up to 75 km</li><li>An stand-by scheme. You can fly at an extra discount if seats are available (also for your family members)</li><li>A good pension scheme</li><li>A personal budget for vitality and career and personal development</li><li>27 vacation days and 13 ADV (additional days off).</li></ul> Ready for your next destination? Excited? You can apply through the button in the upper right corner! We understand that Aircraft Maintenance professionals are often already in a good place. We also know that updating your CV or writing a detailed cover letter isn't always feasible when you come across an exciting job opportunity. That's why we've simplified our application process. Instead of uploading a CV and cover letter, you can simply apply by answering a few practical questions and writing a brief introduction about yourself.

Aircraft Maintenance Technician B1.1 or B1.1/B2 (GWK)

The ACA, Avionics is responsible for carrying out scheduled and unscheduled maintenance on Boeing 737 and ATR aircraft in accordance with manufacture maintenance manuals and industry standards. Rotational position: 3-weeks on, 3-weeks off. Your 3-weeks "on" will be based in Iqaluit. Travel assistance and rotational accommodation are provided. Reporting to: Manager, Maintenance Level: As per the GAFAE Collective Agreement * In accordance with the GAFAE Collective Agreement Duties and Responsibilities Interested candidates should be able to perform the following duties and responsibilities: <ul><li>Perform scheduled work and defect rectification to the appropriate maintenance manual utilizing approved methods and materials;</li><li>Familiarize themselves with all procedures to follow for the maintenance or repairs to the aircraft and/or equipment they are requested to work on;</li><li>Perform work on aircraft as outlined by applicable Work Sheets, Forms, Work Orders, Special Bulletins and Procedures Manuals in conformity with accepted practices;</li><li>Responsibly use and maintain company equipment;</li><li>Maintain clean and orderly work areas;</li><li>Other duties as assigned.</li></ul> Skills and Qualifications Include, but not limited to, the following minimum skills and qualifications: <ul><li>Must be a graduate from an approved Avionics maintenance training program, or equivalent related work experience;</li><li>Transport Canada AME "E" license preferred;</li><li>4 years of experience in Avionics Line Maintenance;</li><li>ATR-42 Endorsement considered an asset;</li><li>Boeing 737 Experience considered an asset</li><li>Must be adept at managing multiple priorities and deadlines;</li><li>Must possess an ability to work in a fast paced, team oriented environment;</li><li>Must possess an ability to assist with maintenance tasks;</li><li>Must possess a valid driver's license;</li><li>Must be able to perform basic troubleshooting;</li><li>Must be able to read and install wire diagrams;</li><li>Must be able to perform shift work as required;</li><li>Ability to communicate in Inuktitut a definite asset;</li><li>Ability to obtain and retain an Airport Restricted Area Identity Card in accordance with the Airport Restricted Area Access Clearance Program regulated by Transport Canada.</li></ul> Closing Date: January 18th, 2025.

ACA, Avionics

Job Type Full-time Description Montana Precision Products - Where Precision Meets Innovation! Montana Precision Products (MPP) is at the forefront of manufacturing excellence, specializing in producing complex and high-precision components for the aerospace and industrial sectors. At MPP, you'll be part of a team that uses state-of-the-art technology to create components that power some of the most recognizable aircraft in the world, including the Boeing 737 MAX, the Airbus A320neo, and other commercial aircraft. Why Work Here: <ul><li>Medical, Dental, Vision Insurance and a Health Reimbursement Account</li><li>Career Growth and Promotional Paths</li><li>Generous Paid Time Off That Starts Accruing Day 1</li><li>401(k) with Match</li><li>9 Paid Holidays</li><li>Annual Performance Based Incentives</li><li>Cross Training Raises of 3% and 6% Depending on Number of Areas Certified in</li><li>Overtime Opportunities</li><li>Employee Recognition and Spot Bonuses for Exceptional Performance</li><li>Paid Paternity and Maternity Leave</li><li>Earn More with our Employee Referral Program</li><li>Tuition Reimbursement Program</li><li>Safety First Culture</li></ul> Job Summary: The ideal candidate is a success-driven self-motivated individual, is willing to put in the extra effort to keep our systems at the forefront of technology. This position requires you to work independently at times and will require after-hours work to perform maintenance tasks, as necessary, during non-critical hours. The IT Field Technician will play a crucial role in maintaining and supporting our technology infrastructure. This position involves providing on-site technical assistance and training to employees, troubleshooting hardware and software issues, and ensuring smooth operations across our network. Schedule: <ul><li> Monday-Thursday, 9 hours per day; Friday 4 hours </li><li>Ability to occasionally work during night shift or weekend hours as needed. </li></ul> Responsibilities: <ul><li>Maintaining and updating technical documentation and manuals.</li><li>Keeping track of IT inventory</li><li>Responsible for company backups and restore process. Using Veeam Software.</li><li>Responsible for Printer cartridge management</li><li>Repairing motherboards and upgrading firmware.</li><li>Acts as the first responder to onsite technology incident and request. </li><li>Assist in constructing technology guidelines and safeguards of the company assets.</li><li>Installing and upgrading anti-virus software to ensure security at the user level.</li><li>Performing tests and evaluations on new hardware.</li><li>Establishing good relationships with all departments and colleagues.</li><li>In addition to the specific responsibilities outlined, this role requires the application of standard IT Field Technician skills.</li></ul> Requirements <ul><li>1-2 years of experience in the IT field as a consultant or member of an IT Department.</li><li>Functional understanding of TCP/IP networks and communication/security protocols</li><li>Must be able to quickly learn and adopt new technologies</li><li>Experience diagnosing and troubleshooting computer and server hardware.</li><li>Experience navigating and troubleshooting operating systems.</li><li>Willingness to troubleshoot and resolve technology related issues for clients</li><li>Willingness to work in a supportive team environment as well as independently</li><li>Good analytical and problem-solving skills.</li><li>Dependable and flexible when necessary.</li><li>High School Diploma or GED.</li><li>Pass a pre-employment drug screen and background check.</li><li>U.S. person status required.</li></ul> Desired: <ul><li>Prior experience working with multiple systems in a high-availability environment</li><li>Strong understanding of computer network infrastructure.</li><li>Ability to implement, administer, and troubleshoot network infrastructure devices. </li><li>Knowledge of application transport and network infrastructure protocols.</li><li>Test, implement and monitor servers, including database, email, file/print, and back up servers and their associated hardware and software.</li><li>Certifications in Microsoft Server 2016, 2018, 2019 environments.</li><li>In-depth knowledge of Windows 10 and 11</li><li>Excellent interpersonal and communication skills</li><li>Certifications in CompTIA Network +, Windows 10, and Active Directory.</li></ul> Equal Opportunity Employer: <ul><li>Montana Precision Products is an Equal Opportunities Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</li></ul> Employment Eligibility: <ul><li>This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to U.S. export-controlled technology. Montana Precision Products will require proof of status prior to employment.</li></ul> Join our team and start your career with top-notch training and support! Apply today! Salary Description $55K - $75k DOE

IT Technician

About Oshkosh AeroTech, an Oshkosh company Oshkosh AeroTech is a leading provider of aviation ground support products, gate equipment and airport services to commercial airlines, airports, air-freight carriers, ground handling and military customers. Oshkosh AeroTech offers products that make a difference in people's lives by supporting those in our communities who do some of the toughest work. They own many of the most trusted brands in the air transportation industry, including LEKTRO®, JetAire®, JetPower®, AmpTekÔ, Jetway®, and more. This position is located at the Lihue International Airport in Lihue, Hawai'i. The pay range for the position is a minimum of $23.11/hour to a maximum of $29.42/hour. RESPONSIBILITES: <ul><li>Diagnose, Troubleshoot, repair, and maintain airport baggage handling equipment and related controls equipment, components, and systems.</li><li>Provide concise, accurate, and sufficiently detailed data for input of all maintenance information.</li><li>Provide emergency/unscheduled and scheduled maintenance repairs of equipment and facilities.</li><li>Read and interpret electrical schematics and work orders to perform required maintenance and service.</li><li>Complete daily work log and work order paperwork for tasks accomplished during shift.</li><li>Respond to maintenance calls when required and/or requested.</li><li>Ability to work productively and cohesively in a diverse and multicultural environment.</li><li>Comply with company safety program.</li><li>Perform other duties as assigned.</li></ul> PHYSICAL DEMANDS: While performing the duties of an Maintenance Repair Technician, the employee is regularly required to stand; walk; use hands and fingers to handle or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. The employee is frequently required to climb or balance and work in small spaces. Ladder work required. The employee must regularly lift and/or move up to 49 pounds. Ability to work in outside weather conditions on an airport ramp around aircrafts and the confined areas of baggage conveyor systems. Specific vision abilities required by this job include good close proximity vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Good hand / eye coordination is required. WORK ENVIRONMENT: The work environment is similar to airport operation with vehicular traffic. The employee is regularly exposed to moving mechanical parts, high, precarious places, outside weather conditions, fumes or airborne particles, toxic or caustic chemicals, cold, and vibration. The noise level in the work environment is usually loud. Employees will work on an airport ramp around aircrafts and around heavy equipment. QUALIFICATIONS: <ul><li>High School diploma or GED equivalent</li><li>Valid Driver's License</li><li>1-2 years' experience in the area of maintenance operations</li><li>Industrial Electrical Experience; specifically with 3 phase motors and 480v</li><li>Mechanic skills including mechanical, pneumatic, hydraulic, troubleshooting, and repair</li><li>Familiarity with Airport operations a plus</li><li>Intermediate understanding of PLC Control systems</li><li>Computer skills with proficiency in Microsoft Word and Excel</li><li>Ability to read blueprints and electrical schematics</li><li>Ability to be badged to work in secure areas of an airport</li><li>Ability to work 1st or 2nd shift including weekends and holidays</li></ul> Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team by email <a href="mailto:corporatetalentacquisition@oshkoshcorp.com" target="_blank">corporatetalentacquisition@oshkoshcorp.com</a>. Oshkosh Corporation is an Equal Opportunity and Affirmative Action Employer. This company will provide equal opportunity to all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Information collected regarding categories as provided by law will in no way affect the decision regarding an employment application. Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

Airport Services - Maintenance Repair Technician I

Responsibilities for this Position Position Title: B2 Licensed Engineer Date: Dec 20, 2024 Location: Farnborough, HAM, GB Company: Gulfstream Aerospace Corporation B2 Licensed Engineer in GAC Farnborough 5,000 Signing Bonus Eligible Unique Skills: Night Shift 4x4: 1900 - 0700 Education and Experience Requirements Other EASA Part 66 Aircraft Maintenance License With relevant aircraft Type Ratings. required. certification experience within an EASA Part 145 organisation. Position Purpose: The Licensed Avionics B2 Inspector, is responsible for ensuring compliance with maintenance, inspection and legislative standards as specified by EASA and the Quality and Airworthiness Manager. Job Description Principle Duties and Responsibilities: Essential Functions: <ol><li> Acting as an inspector in support of a specific aircraft, line or base maintenance input in accordance with MOE Part 146, as revised .</li><li> Perform the day to day duties and responsibilities of a Maintenance Team Leader, when requested by a Service Team Manager .</li><li> When requested by a Maintenance Team Leader or Service Team Manager, the daily management of the manpower resources, consisting of licensed mechanical and avionics inspectors and fitters, as assigned to a specific aircraft line or base maintenance input .</li><li> Certifying those tasks that they have been trained on and authorised to perform Inspect and certify, at both Luton main base and other locations worldwide In addition, carrying out any other maintenance tasks, requested by the Maintenance Team Leader For base maintenance, this can include Category C Certification for those qualified in accordance with MOE Part 34, as revised .</li><li> Promoting and ensuring that aircraft line or base maintenance commitments that they are assigned to are fulfilled within the assigned time scale In the event of a delay for any reason, they are responsible for informing the Maintenance Team Leader and Service Team Manager as soon as possible .</li><li> Promoting and ensuring that all aircraft maintenance documentation relevant to the work that they have personally performed or supervised is completed fully, including all task stage requirements before the end of each shift or their reassignment to another work task, during the same shift .</li></ol> Additional Functions: <ol><li> Understanding and sharing the strategic position of the department in relation to Product Support, .</li><li> Advising the STM of any difficulties or shortcomings that may be experienced through performing departmental duties. .</li><li> Awareness and understanding of departmental measures in place for the monitoring of department goals, product delivery and quality. .</li><li> Maintaining personal &amp; departmental husbandry to ensure continued department success. .</li><li> Ensuring handovers are carried out as required. to ensure work flow. .</li><li> Attending Stand-up Board meetings as required. to roll out performance communications and discussions. .</li><li> Such other duties as may be, from time to time, delegated by the STM or Department Manager. .</li><li> Promoting and ensuring that the quality of workmanship in the final product is to a standard acceptable to the EASA and the UK CAA. This is achieved by complying with statutory and company standards for all maintenance and design change work on aircraft and/or components, including ensuring the correct and adequate standards of cleanliness and tidiness for the work in hand. .</li></ol> Perform other duties as assigned. Other Requirements: <ol><li> Extensive combination of line &amp; base maintenance experience. </li><li> Evidence of aircraft inspection and certification experience gained during the above extensive line and base aircraft work experience. </li><li> Experience within the corporate industry an advantage. </li><li> Good working knowledge of Aviation Legislation. </li><li> Good verbal and written communication skills. </li><li> Good practical computer user skills. </li><li> Flexible approach to working patterns. </li><li> Able to demonstrate a well-organized approach to daily job tasks. </li></ol> Additional Information Requisition Number: 223930 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 01/31/2025 Equal Opportunity Employer/Veterans/Disabled. Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information " Site Utilities " Contacts " Sitemap Copyright 2020 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-SJT Job Segment: Aerospace Engineering, Inspector, Aerospace, Night, Engineering, Quality, Aviation, Operations PI255450406 Back To Search Results Gulfstream designs, develops, manufactures, markets, services and supports the world's most technologically advanced business-jet aircraft.

B2 Licensed Engineer

Live an Adventure, Master your Craft, Find your Purpose At Dynamic Aviation, we solve unique challenges for our customers with innovative aviation solutions. Our focus is on operations that serve, protect, and enhance the lives of families and communities worldwide. Whether modifying aircraft to help protect our service members overseas, performing geographical mapping for scientific research, or working to suppress large wildfires on the West Coast, we serve with integrity and excellence. Job Purpose: The Oil Spill Response (OSR) Aircraft Mechanic Boeing 737 role exists to perform all scheduled and unscheduled maintenance tasks on assigned aircraft (modified Boeing 737-500) at Dynamic Aviation's base in Weyers Cave, VA. Company Compensation and Perks: <ul><li>Full time position </li><li>Comprehensive Benefits offered<ul><li>Medical, Dental, Vision</li><li>HSA/FSA</li><li>Life Insurance, Long-Term and Short-Term Disability</li><li>Employee Assistance Program</li><li>401(k) with Company Match </li><li>Paid Time Off (PTO) </li><li>Company Wellness Program </li><li>Relocation Assistance</li></ul></li></ul> Duties: <ul><li>Read and interpret maintenance manuals and FAA/manufacturer publications and directives to determine the feasibility and method of repairing or replacing malfunctioning or damaged components</li><li>Perform all scheduled and unscheduled maintenance on assigned aircraft or ground support equipment</li></ul><ul><li>Work with the team lead or manager on upcoming maintenance activities</li></ul><ul><li>Replace or repair worn, defective, or damaged components using hand tools, gauges, and testing equipment</li><li>Read and interpret pilots' discrepancies to diagnose cause</li><li>Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools</li><li>Organize and maintain shop floor /environment from clutter or debris</li><li>Learn procedures and steps for higher level assignments</li><li>Complete required paperwork to comply with Federal Regulations and company procedures</li><li>Maintain parts inventory with aircraft and report all parts received from headquarters</li><li>Act as customer service representative with tasks as requested by management /pilots, assist pilots with aircraft servicing pre /post flight</li><li>Independently develop work schedules and assignments to accomplish job responsibilities</li><li>Deploy with the aircraft on spray operations/tests/demos as needed by the customer</li><li>Fly with the aircraft on spray missions as a spray system operator</li><li>Maintain the spray system in accordance with engineering documentation and FAA approved manuals</li><li>Responsible for completing expense reports in a timely manner &lt; 14 days</li><li>Troubleshoot and repair systems (OEM and STC's)</li><li>Operate the spray system in the aircraft during low level spray flights</li><li>Other duties as required</li></ul> Skills/Qualifications: <ul><li>Relocation to the Weyers Cave, VA area required</li><li>High school diploma or GED required</li><li>FAA A&amp;P certificate required</li><li>Avionics /electrical knowledge required</li><li>Valid US Passport</li><li>Minimum of 5 years aircraft experience of Boeing 737 or like series aircraft experience desired</li><li>Ability to travel away from home location for 30 days based on customer needs (longer if needed)</li><li>Good teamwork, communication, problem solving and decision-making skills</li><li>Computer skills with Microsoft Apps including email and submission of detailed maintenance and flight information. Word, Outlook, Excel, PowerPoint, Teams, etc.</li><li>Strong customer service skills</li><li>Highly resourceful</li><li>Ability to:<ul><li>Crawl in and out of tight spaces </li><li>Comfortably work at elevated heights of at least 30 feet for extended periods of time</li><li>Lift, balance and carry 75 lbs.</li><li>Work in enclosed hangars and exterior weather conditions</li><li>Work in austere conditions</li></ul></li></ul> It is the policy of Dynamic Aviation to prohibit and eliminate discrimination on grounds of race, color, religion, sex, (including pregnancy, childbirth or related medical conditions), sexual orientation, gender identity, national origin, ancestry, age, disability, veteran status, marital status, or any other characteristics protected by law. It is also Dynamic Aviation's policy to provide equal employment for all and comply with any affirmative action obligations pursuant to the Federal Executive Orders, 11246 and 11375, as amended. Other details <ul> <li> Pay Type Hourly</li> </ul> Apply Now

Aircraft Mechanic Boeing 737

Description When it comes to making low cost travel easy, safe and reliable, there is no team more important than Engineering &amp; Maintenance. As one of our B2 Licensed Engineers you'll play a vital role in keeping our customers moving and reducing delays - and helping us continue to have the highest technical reliability of any Airbus fleet in the world. As part of an 800 strong team, you'll do this by using your technical knowledge of aircraft to perform maintenance activities on our fleet of A320 and A320neos to industry leading safety and technical standards. Working under the guidance of Duty Engineers or Aircraft Maintenance Supervisors, you'll carry out defect rectification and routine servicing using the latest tools and technology. Everyone at easyJet shares the 'Orange Spirit', and within Engineering &amp; Maintenance that means working with people who collaborate, are approachable, are incredibly diverse and inclusive, stand up to be counted, and have your back. And as well a rock solid commitment to your ongoing development and training, we can also offer you lots of other benefits including bonuses, share schemes, and of course discounts on flights and holidays. As part of our continuous commitment to the well-being and fulfilment of our Engineering &amp; Maintenance team, easyJet has recently reviewed salaries across the department. In recognition of the production teams overall contribution we have increased both the basic pay and social impact allowance. What you need to do the role First and foremost you'll need to hold a UK Part 66 B2 licence (preferably holding A320 type rating), have operational maintenance experience, and possess technical knowledge of aircraft along with the hand skills needed to get the job done. You'll be comfortable using aircraft maintenance documentation and computer based reporting and recording systems, and have working knowledge of health and safety legislation. You'll also naturally need to be able to work effectively as part of a team, with the focus and flexibility to meet deadlines and overcome operational challanges, and being able to collaborate with people at all levels within our internal structure. What you'll get in return • Competitive base salary (recently reviewed) • Up to 20% bonus • Up to 32 days annual leave based of shift • BAYE, SAYE &amp; Performance share schemes • 7% pension • Life Assurance • Flexible benefits package • Excellent staff travel benefits Location &amp; Hours of Work This full-time role will be based in Gatwick working NNNN 10.75 hour shifts or DDNN 12 hour shifts. Shift pattern will 4x4 with occasional travel requirements to easyJet's headquarters or network locations. Requirements of the Role About easyJet Ready to make your next move? How about make your mark? Join a team with unstoppable drive and passion at easyJet. At easyJet our aim is to make low-cost travel easy - connecting millions of people to what they love using Europe's best airline network, great value fares, and friendly service. Whether you're working as part of our front-line operations or in our corporate roles, we'll give you everything you need to make a personal impact on our growing business. We believe in sharing new opportunities, stepping up to challenges and supporting each other with our Orange Spirit. Make a difference with your next role. Make it easyJet. Apply Complete your application on our careers site. We encourage individuality, empower our people to seize the initiative, and never stop learning. We see people first and foremost for their performance and potential and we are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates. #LI-JC2

Company Description AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas - immunology, oncology, neuroscience, and eye care - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us at <a href="http://www.abbvie.com" target="_blank">www.abbvie.com</a>. Follow @abbvie on Twitter, Facebook, Instagram, YouTube and LinkedIn. Job Description Purpose The Senior Flight Engineer reports to the Director of Aviation Maintenance. Primary duties will include complete oversight of regulatory compliance with FAA regulations, manufacturers' inspection and maintenance programs, and Department and Company policy. They will assist in providing daily personnel work assignments as well as guide, mentor, and provides on-the-job instruction or training to the assigned group in related technical information job procedures, safety and general shop and hangar practices. They may also be appointed as a Crew Chief to a specific aircraft, in charge of its legal compliance, inspection status, and maintenance forecasting. In conjunction with supervisory duties, they will perform scheduled/unscheduled maintenance, and launch/recovery support. Responsible for flying on corporate aircraft during international travel, they will provide technical expertise during in-flight and AOG situations along with tending to the comfort and safety needs of passengers to include serving food and beverages. While conducting appropriate cabin management practices, the Flight Engineer will have a solid understanding of on-board communication systems to include satellite TV, internet, and Iridium phone systems. The Sr. Flight Engineer will be a dynamic role to ensure the utmost quality criteria of company aircraft as described below, but not limited to: Responsibilities <ul><li>Perform maintenance, preventive maintenance, inspections, engine runs and taxi operations that conform to the standards established by the Company, regulations, and industry best practices.</li><li>Availability to work nights, weekends, or flexible hours as determined by flight schedule (24/7 Operation).</li><li>Ability to optimize aircraft dispatch reliability and operational availability through the role of Flight Engineer during international travel.</li><li>Act as passenger service provider and safety coordinator. Requires training in evacuation procedures, medical aid, passenger service, and food handling procedures.</li><li>Ensure cabin configuration and associated management functions are performed in accordance with Departmental policies and procedures and Federal Aviation Regulations (FARs).</li><li>Demonstrate proficiency in the use of all onboard passenger service equipment, to include DVD player, SatCom, Aircell, BBML, and Airshow systems and applications.</li><li>Oversee that work performed by contract maintenance facilities is accomplished and properly documented in accordance with FAA and AbbVie department requirements.</li><li>Provide active participation in the Department Safety Management System (SMS) and involvement in obtaining bi-annual certification through IS-BAO (International Standard- Business Aircraft Operations).</li><li>Assist in maintaining spare parts inventory; including ordering, shipping and receiving.</li><li>Ability to troubleshoot complex technical issues in time-sensitive situations.</li><li>Have thorough understanding of avionics/electrical/computer systems.</li><li>Provide a professional demeanor and excellent customer service skills with effective communication, interpersonal, and collaboration skills.</li><li>Proficiency with the use of technology and computer knowledge to include Microsoft Office and related business applications i.e. CMP/AVTRAK.</li><li>Pursue on-going technical training and remain cognizant of industry advancements through conferences and seminars.</li></ul> Qualifications Qualifications <ul><li>Associates Degree Required. Bachelor's Degree preferred.</li><li>5+ years of business aviation maintenance and avionics experience on large cabin business aircraft</li><li>FAA Airframe and Power plant certificate required. Inspection Authorization preferred.</li><li>NCATT AET certification preferred.</li></ul> Additional Information Applicable only to applicants applying to a position in any location with pay disclosure requirements under state or local law: <ul><li>The compensation range described below is the range of possible base pay compensation that the Company believes in good faith it will pay for this role at the time of this posting based on the job grade for this position. Individual compensation paid within this range will depend on many factors including geographic location, and we may ultimately pay more or less than the posted range. This range may be modified in the future.</li><li>We offer a comprehensive package of benefits including paid time off (vacation, holidays, sick), medical/dental/vision insurance and 401(k) to eligible employees.</li><li>This job is eligible to participate in our short-term incentive programs.</li><li>This job is eligible to participate in our long-term incentive programs</li></ul> Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, incentive, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole and absolute discretion unless and until paid and may be modified at the Company's sole and absolute discretion, consistent with applicable law. AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives, serving our community and embracing diversity and inclusion. It is AbbVie's policy to employ qualified persons of the greatest ability without discrimination against any employee or applicant for employment because of race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, medical condition, genetic information, gender identity or expression, sexual orientation, marital status, status as a protected veteran, or any other legally protected group status. US &amp; Puerto Rico only - to learn more, visit <a href="https://www.abbvie.com/join-us/equal-employment-opportunity-employer.html" target="_blank">https://www.abbvie.com/join-us/equal-employment-opportunity-employer.ht…</a> US &amp; Puerto Rico applicants seeking a reasonable accommodation, click here to learn more: <a href="https://www.abbvie.com/join-us/reasonable-accommodations.html" target="_blank">https://www.abbvie.com/join-us/reasonable-accommodations.html</a>

Senior Flight Engineer/Aircraft Technician

Company Description AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas - immunology, oncology, neuroscience, and eye care - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us at <a href="http://www.abbvie.com" target="_blank">www.abbvie.com</a>. Follow @abbvie on Twitter, Facebook, Instagram, YouTube and LinkedIn. Job Description Purpose The Flight Engineer reports to the Director of Aviation Maintenance and is responsible for flying on corporate aircraft during international travel, will provide technical expertise during in-flight and AOG situations, along with tending to the comfort and safety needs of passengers while conducting appropriate cabin management practices. The Flight Engineer will have a solid understanding of on-board communication systems to include satellite TV, satellite internet, and Iridium phone systems. While at home station, the flight engineer will perform scheduled/unscheduled maintenance, launch/recovery support, and proper documentation of company aircraft in accordance with FAA regulations, manufacturers' inspection and maintenance programs, and Department and Company policy. The Flight Engineer will be a dynamic role to ensure the utmost quality criteria of company aircraft. Responsibilities <ul><li>Perform maintenance, preventive maintenance, inspections, engine runs and taxi operations that conform to the standards established by the Company, regulations, and industry best practices</li><li>Availability to work nights, weekends, or flexible hours as determined by flight schedule - Ability to optimize aircraft dispatch reliability and operational availability through the role of Flight Engineer during international travel</li><li>Act as passenger service provider and safety coordinator. Requires training in evacuation procedures, medical aid, passenger service, and food handling procedures.</li><li>Ensure cabin configuration and associated management functions are performed in accordance with Departmental policies and procedures and Federal Aviation Regulations (FARs)</li><li>Demonstrate proficiency in the use of all onboard passenger service and cabin entertainment equipment</li><li>Oversee that work performed by contract maintenance facilities is accomplished and properly documented in accordance with FAA and AbbVie department requirements</li><li>Provide active participation in the Department Safety Management System (SMS)</li><li>Assist in maintaining spare parts inventory; including ordering, shipping and receiving.</li></ul> Qualifications Qualifications <ul><li>2+ years of aviation maintenance/avionics experience</li><li>FAA Airframe and Powerplant certificate required</li><li>Ability to troubleshoot technical issues in time-sensitive situations</li><li>Have thorough understanding of avionics/electrical/computer systems</li><li>Provide a professional demeanor and excellent customer service skills</li><li>Effective communication, interpersonal, and collaboration skills</li><li>Proficiency with the use of technology and computer knowledge to include Microsoft Office and related business applications</li><li>Pursue on-going technical training and remain cognizant of industry advancements through conferences and seminars</li></ul> Additional Information Applicable only to applicants applying to a position in any location with pay disclosure requirements under state or local law: <ul><li>The compensation range described below is the range of possible base pay compensation that the Company believes in good faith it will pay for this role at the time of this posting based on the job grade for this position. Individual compensation paid within this range will depend on many factors including geographic location, and we may ultimately pay more or less than the posted range. This range may be modified in the future.</li><li>We offer a comprehensive package of benefits including paid time off (vacation, holidays, sick), medical/dental/vision insurance and 401(k) to eligible employees.</li><li>This job is eligible to participate in our short-term incentive programs.</li></ul> Note: No amount of pay is a considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, incentive, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole and absolute discretion unless and until paid and may be modified at the Company's sole and absolute discretion, consistent with applicable law. AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives, serving our community and embracing diversity and inclusion. It is AbbVie's policy to employ qualified persons of the greatest ability without discrimination against any employee or applicant for employment because of race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, medical condition, genetic information, gender identity or expression, sexual orientation, marital status, status as a protected veteran, or any other legally protected group status. US &amp; Puerto Rico only - to learn more, visit <a href="https://www.abbvie.com/join-us/equal-employment-opportunity-employer.html" target="_blank">https://www.abbvie.com/join-us/equal-employment-opportunity-employer.ht…</a> US &amp; Puerto Rico applicants seeking a reasonable accommodation, click here to learn more: <a href="https://www.abbvie.com/join-us/reasonable-accommodations.html" target="_blank">https://www.abbvie.com/join-us/reasonable-accommodations.html</a>

Flight Engineer/Aircraft Technician

About the job B2 Avionics Technician JOB SUMMARY: The B2 Avionics Technician will be responsible for ensuring optimal service support for maintenance and flight line activities to achieve excellent fleet availability with the highest quality and safety standards. They will perform detailed inspections, assembly, installation, repair, or replacement of aircraft components and systems, as well as maintenance (both scheduled and unscheduled) and function checks of components. The B2 Avionics Technician will also provide on-the-job training as required. RESPONSIBILITIES: <ul><li>Comply with Aviation, Safety, Quality, and Export Control Regulations and Procedures</li><li>Comply with Airbus Helicopters Management Systems, Policies, and Regulations</li><li>Work as part of a team to perform scheduled and unscheduled maintenance on the helicopter fleet</li><li>Undertake aircraft maintenance, repair, and inspection tasks, quality checks, and completion of documentation</li><li>Perform electrical assembly, integration, modification, system repairs, quality inspections, and functional tests</li><li>Analyze performance and isolate malfunctions of avionic instrument and flight control systems</li><li>Conduct checkouts, inspections, and repairs of avionic instrument and flight control systems</li><li>Ensure all work is recorded and signed off appropriately</li><li>Verify aircraft status, update scheduled tasks, and sign off on aircraft airworthiness</li><li>Train personnel on maintenance manuals, safety directives, and FOD procedures</li><li>Perform other duties as assigned</li></ul> SPECIFICATIONS: GENERAL <ul><li>Proven problem-solving and decision-making skills</li><li>Strong communication, time management, and organizational skills</li><li>Ability to work under pressure and meet deadlines</li><li>Good interpersonal skills</li><li>Self-motivated and able to work alone or as part of a team</li><li>Experience in MS Office</li><li>Ability to inspect entire Avionics Package for serviceability and airworthiness</li></ul> PRACTICAL EXPERIENCE <ul><li>Five or more years of experience in helicopter maintenance</li><li>Five or more years of experience in the aeronautical industry</li></ul> SPECIALIST KNOWLEDGE <ul><li>FAA or EASA Part-66 B2 licensed aircraft technician</li><li>Aircraft Maintenance Type Training Course Part 147</li><li>Practical working experience with Cougar/Super Puma family</li></ul> ESSENTIAL <ul><li>Experience working within a team of technicians and ability to adapt to various work environments</li><li>English Proficiency (Advanced Level)</li><li>Advanced Technical Diploma or equivalent</li><li>Understanding of technical documentation</li><li>Knowledge of Quality Control/Quality Assurance activities</li><li>Knowledge of International and National Civil Aviation Legislation</li><li>Ideal candidate will have experience working on Airbus Helicopters platforms</li></ul> DESIRABLE <ul><li>Experience working in a military environment</li><li>Bachelor's degree in an engineering discipline</li></ul>

194 Technical and engineering Not specified Jobs