field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_flight_regions

aviationcv_job_recency

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non routine task cards</li><li>Performance of related operational tasks</li><li>Perform daily / weekly checks as required</li><li>Perform pre-flight and post-flight inspections</li><li>Review and carry out necessary actions to rectify flight problems</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance on Boeing</li><li>Holder of EASA Part-66 Cat B1</li><li>B737, B747, B757, B767, B777, B787 rating with minimum 3 years experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Experience in Corporate Aviation is an advantage</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

B1 EASA Licensed Aircraft Engineer Boeing

Position and Responsibilities<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Advanced trouble shooting experience</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance on Airbus types</li><li>Holder of EASA Part-66 Cat B1.1 License</li><li>A320 Family, and/or &nbsp;A330/340/A350 rating with minimum 3 years’ experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Experience in Corporate Aviation is an advantage</li><li>Fluent in English</li><li>Willing to re-locate to Basel area</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Technician Airbus

Key Aspects of the Activity<ul><li>Fulfil the duties and tasks within the division aircraft maintenance and general technical&nbsp;support</li><li>Perform routine and non routine task cards</li><li>Trouble shooting</li><li>Perform related operational tasks</li><li>Liaise with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li><li>Disassembling, assembling and changing components</li><li>Performing repairs and modifications</li><li>General service tasks</li></ul> &nbsp;Required Skills and Qualifications<ul><li>3-5 years practical experience of base maintenance</li><li>Some work experience within base aircraft maintenance, would be an advantage</li><li>Understand EASA Part 145 maintenance and production organization in accordance with&nbsp;the EASA regulations</li><li>Understand and perform the workload in accordance with aircraft legislation and&nbsp;procedures</li><li>Fully knowledge and understanding of aircraft procedures, processes, requirements</li><li>Ability to read and understand technical instructions and technical processes</li><li>Some EASA Part-66 module trainings would be beneficial</li><li>Ensures that safety rules are followed during all activities</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

Aircraft Technician

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational and functional tasks</li><li>Performance trouble shooting on engine / airframe systems as required</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>3-5 years practical experience of base maintenance</li><li>Holder of EASA Part-66 Cat B1 with minimum one of the following type ratings:</li><li>Gulfstream IV / 450/ &nbsp;V / 550 / 650 with experience as Certifying Staff</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience desirable</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Engineer Gulfstream

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Troubleshoot, repair, inspect and rectify flight problems</li><li>Perform and record all work performed in accordance appropriate manuals and regulations</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance</li><li>Holder of EASA Part-66 Cat B1 with minimum one of the following type ratings:</li><li>BD100 series / BD700 / CL 600 with 2-3 years’ experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ</li></ul>

B1 EASA Licensed Aircraft Engineer Bombardier

Position und Responsibilities<ul><li>Work in accordance with applicable procedure as per AMAC DOE, POE, MOE, CAME and other AMAC Specification</li><li>Ensure adequate communication and liaison AMAC internally and especially within the Quality Assurance Team, Maintenance and the Production Team</li><li>Liaise, support and attend audits of authorities and establish audit checklists</li><li>Review and amend Organisation Expositions, Capability List, Procedures (Handbooks, Process Specification, Technical Instructions) and Forms</li><li>Provide continuous detailed account of the overall current quality status</li></ul>Main Activities<ul><li>Preparation and performance of internal training and briefing sessions related to AMAC internal procedures and other technical subjects</li><li>Preparation und update of company manuals procedures</li><li>Support to the Maintenance, Production, Design Organisation and CAMO regarding application, extension and renewal of Maintenance Licences, Internal Authorisations</li><li>Act as Quality Inspector for the Production, Maintenance, Design and CAMO Organisation</li><li>Act as Internal Quality Auditor</li><li>Support the Manager QA and the Director QA in administrative and organisational aspects, in particular for the issuance, renewal or changes of Approval Certificates</li></ul>Required Skills and Qualifications<ul><li>Several years of practical experience within the aviation environment</li><li>Active / former holder of Aircraft Maintenance Licence preferably</li><li>Several years of experience in functions related to quality assurance and / or Quality inspection</li><li>Auditing experience</li><li>Detailed knowledge about EASA Regulations Part 145, Part M-CAMO and / or Part 21 Subpart G-J and Guidance Materials</li><li>Ability to establish and write handbooks, procedures, technical instructions and audit-reports</li></ul>

Inspector Quality Assurance

Position and Responsibilities<ul><li>Ensure that Certification Basis is appropriate for the product, system or installation and that all applicable rules, regulations, Means of Compliance and interpretations are applied correctly.</li><li>Ensure adequate communication and liaison internally and with external Third Parties.</li><li>Act as Certification Engineer.</li></ul>Main Activities<ul><li>Internal and external coordination of certification-activities for outfitting- and modification-projects between Office of Airworthiness, Compliance Verification Engineers, Engineering Department and Third Parties such as Air Authorities, Sub-Contractors, DERs</li><li>Preparation of certification documentation and certification supporting documentation such as Certification Plan, Certification Compliance Sheets, Master Data List, Classification of Design Changes, STC-Application</li><li>Perform reviews of technical A/C documentation and coordination-activities for A/C operational aspects such as registration changes, import and export of A/C, compliance to JAR OPS 1 (EU OPS)</li><li>Support the Head of Design Organisation, Chief of Office of Airworthiness and the Office of Airworthiness in administrative and organisational aspects</li></ul>Required Skills and Qualifications<ul><li>Qualification as a Senior Engineer, i.e. several years of education and experience in the fields of aviation engineering and design.</li><li>Engineering specialist in one of the mentioned disciplines (Electric/Avionic/Systems/Mechanic)</li><li>Experience in the various approval procedures would be appreciated&nbsp;(EASA Part 21 / CS / JAR / FAR).</li><li>Computer literate with MS Office software (Word, Excel, Power Point)</li><li>Good communication skills in English; German or French in addition will be an advantage.</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul>

Certification Engineer

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

Avionics & Electrical Engineer

At SR Technics we aspire to be the leading, most customer-centric and most innovative MRO company. To contribute to our mission, we look for an experienced Licensed Aircraft Engineer B1/B2 Line Maintenance A320 Headquartered at Zurich Airport in Switzerland, SR Technics is one of the world-leading MRO service providers in the civil aviation industry and works with an extensive network of partners and business development offices in Europe, America, Asia, and the Middle East. We offer comprehensive, fully customized solutions for the Maintenance, Repair &amp; Overhaul of aircraft engines, airframe, and components including impeccable technical support to over 500 customers worldwide. To start your talent journey with us, apply now as: Licensed Aircraft Engineer - Basel B1/B2 Line Maintenance A320 The position holder is an EASA-Part 66 licensed B1/B2 with relevant aircraft types and is expected to support the network as required. Your tasks <ul> <li>Promote a positive Safety Culture and to ensure that Safety and Quality Policy is communicated /promoted and implemented within the organisation</li> <li>Perform Line maintenance Transit checks, Preflight checks, Daily and Weekly checks, Defect rectification, Component replacement, AOG recovery and troubleshooting</li> <li>Work package and certificate of release to service</li> <li>Ensure the on-time performance of customer aircrafts</li> <li>Ensure that aircraft is operating in airworthiness conditions</li> <li>Work autonomously within a Team spirit environment and assist the Shift-Leader / Supervisor</li> <li>Ensure clear communication and reporting</li> </ul> Your profile <ul> <li>Holder of a Valid B1 or B1/B2 EASA Part-66 License</li> <li>Type rated A320</li> <li>Good command of verbal and written English</li> <li>Proficient in MS Office</li> <li>Positive attitude and solutions orientated</li> <li>High degree of customer focus, good communication and team-oriented </li> <li>Proven ability to work under pressure</li> <li>Demonstrate working knowledge of health, safety, and quality procedures to the required level</li> </ul> Your chance - An attractive position in a global and dynamic company - Competitive employment conditions - Opportunity for professional and personal development - Exciting internal training opportunities - We offer a mix environment with line and light base maintenance opportunities Please note that only candidates with Swiss or EU nationalities will be considered for this position.

BSL Aircraft Technician

At SR Technics we aspire to be the leading, most customer-centric and most innovative MRO company. To contribute to our mission, we look for an experienced Aircraft Engineer B1 &amp; B2 A320 (Sheet Metal skill – Night shift). Headquartered at Zurich Airport in Switzerland, SR Technics is one of the world-leading MRO service providers in the civil aviation industry and works with an extensive network of partners and business development offices in Europe, America, Asia, and the Middle East. We offer comprehensive, fully customized solutions for the Maintenance, Repair &amp; Overhaul of aircraft engines, airframe, and components including impeccable technical support to over 500 customers worldwide. To start your talent journey with us, apply now as:
<h2>Tasks</h2>
<ul>
<li>Ensure the on-time performance of customer aircrafts</li>
<li>Ensure that aircraft is operating in airworthiness conditions</li>
<li>Keep all airworthiness data up-to-date according the actual revision</li>
<li>Ensure full adherence to maintenance contracts, company and customer procedures to high quality standards</li>
<li>Ensure hygiene and environmental protection according to procedures</li>
<li>Assist the Shift-Leader / Supervisor</li>
<li>Ensure clear communication and reporting</li>
<li>Act as Mentor as required</li>
</ul>
<h2>Requirements</h2>
<ul>
<li>Holder of a valid B1 and/or B2 EASA Part-66 License</li>
<li>Sheet Metal skill</li>
<li>Demonstrate working knowledge of health, safety, and quality procedures to the required level</li>
<li>Good command of verbal and written English, level B2</li>
<li>Proficient in MS Office</li>
<li>Positive attitude and solutions orientated</li>
<li>High degree of customer focus, both internal and external</li>
<li>Demonstrate good communication and team-oriented working practices</li>
<li>Proven ability to work under pressure</li>
</ul>
<h2>Benefits</h2>
<ul>
<li>An attractive position in a global and dynamic company</li>
<li>Competitive employment conditions</li>
<li>Opportunity for professional and personal development</li>
</ul>

14 Technical and engineering Jobs in Switzerland