field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Job Description: About us SIM is a department of ~600 people based in Bangalore (India), Toulouse (France), Hamburg &amp; Bremen (Germany), Getafe (Spain), Filton (UK), Mobile (US), Beijing (China), and Kuala Lumpur (Malaysia). Our main missions are: • Retrofit Solutions: Deliver and Support added value Retrofit solution packages to maintain continued aircraft airworthiness and improve Customers' Operations &amp; profitability • Maintenance Program Engineering: Deliver customer value through an array of services (from business development to the preparation of Planned Maintenance Service products, maintenance program optimization exercises and Parking &amp; Storage) • Scheduled Maintenance Services: Support the operation and maintenance of all Airbus aircraft and all customers worldwide, from development of initial requirements to deviation management and optimization of maintenance tasks. • GSE Engineering: Engineering activities related to GSE &amp; Tools (including Design, Services, Manufacturing Engineering &amp; Front desk) for all Airbus aircraft and all customers worldwide Job description We are looking for a Lead Retrofit Solutions Engineer A350 (d/f/m) within Airbus (Commercial Aircraft) located in Bangalore. You will be part of the international team within the Cabin Retrofit Solutions . We are searching for enthusiastic A350 colleagues who want to be part of the Upgrade services community. You bring added value to our customers' A350 fleet. You are responsible for the definition and integration of retrofit design solutions for A350 aircraft post-delivery. Your main focus will be on the cabin modifications including associated mechanical and electrical interfaces and adaptation of related cabin systems. Your main tasks and responsibilities: • As a Lead Retrofit Solutions Engineer you coordinate all design activities in terms of cost, time and quality • You check and release design drawings (if necessary delegations are available), also to work towards getting specific ATA delegations • One of your main tasks will be to prepare and to follow-up of all relevant certification documents e.g. Full-TRS, MAS, ICS and supporting documents • You will be in charge of analyze PRE and POST status of the aircraft relevant to the applicable ATA chapters <ul><li>Managing and validating internal and external engineering work packages is also one of your</li></ul> tasks • You provide engineering data to Production, supply chain and other involved internal stakeholders • You participate in technical meetings with internal and external stakeholders • You also support/participate to answering of Tech Request , Defect reports for the Cabin A350 retrofit scope • Provide Service Bulletin embodiment support remote / on-site (worldwide) is in your responsibility as well • You support airworthiness activities and Safety Management System Your hard skills and qualifications: • Deep understanding in handling typical A350 design tools, such as CATIA V5, VPM, Pass V2 required • You have an existing delegation of Technical Approval Officers/Permit Holders in a relevant ATA chapter is a plus • Project Management skill Soft skills • You are a team player and cooperation is very important to you • You have a positive and open mindset and good communication skills • You are well organized and independent work is natural for you • You are able to give guidance to subcontractors and project stakeholders • A high level of personal responsibility and flexibility complete your profile Business travels: This position involves a willingness to travel on an irregular basis, e.g. twice a year worldwide to support the customer during the upgrade embodiment. Experience Level Needed: +12 years as Cabin Retrofit Engineer or similar position • Contribute to Design activities for Retrofit Solutions • Setting and committing to SB/Kit contractual delivery dates and associated costs in order to feed commercial &amp; accounting units, including for contract negotiation &amp; build up (Retrofit Modification Order - Letter Agreement). • Reserving industrial capacity as well as internal resources. • Leading and coordinating op-erational teams and guaranteeing the "Quality" and "On time delivery" of the project deliverables. • Educated Master's degree in engineering or similar will be required • Completed technical apprenticeship (e.g. in aviation sector) with appropriate further training/education • Experience in the A350 Programme for several years • Maintenance Repair Overhaul (MRO) experience is welcome • Airbus (Mise au point) knowledge is a plus For this position the following skills are requested • Technical project management experience and proficiency in handling of typical design tools, such as CCD, CATIA V5, APS, 3DCOMM, PASS SSI, TAKSY/GILDA, CIRCE and ICC are required • Knowledge of aircraft Systems configuration management and Aircraft maintenance • Proactive, good team player and good organizational skills. • Communication skills and assertiveness. • English Advanced level is mandatory This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus India Private Limited Employment Type: Permanent Experience Level: Professional Job Family: Customer Eng.&amp;Technical Support&amp;Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Lead Retrofit Solutions Engineer CABIN

Job Description: Contact : Please apply on line for this vacancy using your eRecruiting profile with your CV attached. Description of the job : A vacancy for an A400M MRO Network maintenance B1 or/and B2 technician has arisen within Airbus Defence &amp; Space. As the successful candidate, you will join the MRO Network department (TASRM). This position is based full-time in MAESE Military Base (Sevilla - Spain), and as such you must be available to work full time in this place. Working as part of an Airbus D&amp;S Maintenance team within the A400M MRO Network, will include the performance and certification of these tasks, including supervision and certification of unlicensed mechanics tasks. A department such MRO Network will offer you the opportunity to travel, live and work under other cultures. This position will require a security clearance or will require being eligible for clearance by the recognized authorities. Task &amp; accountability: Your main tasks and responsibilities will include: • Be responsible for performing and certification of both scheduled and unscheduled tasks previously agreed with the customer by Customer Services. • SB coming from modifications not performed at FAL or appearing after the delivery of the A/C, and from support asked by the Customer for different kind of repairs or maintenance tasks. • Manage small groups of non-licensed mechanics in the performance of maintenance activities and coordination and supervision their OJT, if needed • Be involved in the setting up of working processes and practices. • Be involved in all aspects of technical support of a new advanced military transport aircraft. Required skills : You will have the following skills and experience: • EMAR Part 66 license (A400M included would be nice to have). • Experience in MRO on a modern digital aircraft: A380, A350 etc. • Strong interpersonal and communication skills. • Ability to work in a multicultural environment. • Advanced level of Spanish and English. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent Experience Level: Entry Level Job Family: Customer Eng.&amp;Technical Support&amp;Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

A400M MRO Network Maintenance technician (B1/B2) in MAESE

Norm &amp; Regulation Aircraft Engineer - - - - - - - - - - - - MISSION: - Implement N&amp;R concerning SMS and NAA requirement. - Analysis NAA regulation and mapping with Aircraft Tire manufacturing process. - Monitor the NAA regulation and deploy tactical actions to local. - Customer (Airline) compliance checklist as needed. *N&amp;R = Norms &amp; Regulations, SMS = Safety Management System, NAA = National Aviation Authority *MOE = Maintenance Organization Exposition, RSQCM = Repair station Quality control Manual KEY EXPECTED ACHIEVEMENTS • Develop and deploy a Tactical Plan NAA regulation and SMS. • Guaranty the consistency of the analysis and expertise provided • Ensure that regulation analysis is available to the internal organizations • Ensure that MOE, RSQCM up to date and compliance with NAA. • Ensure that NAA monitored and up to date, Launch and follow-up of regulatory • Ensure that training program compliance with NAA regulation • Realize and follow the certification process in all countries, • Specific training management /monitor link with Regulation • Ensure communication (Newsletter, Intranet Site, news) QUALIFICATIONS <ul><li>Bachelor's degree in a relevant field</li><li>Experience in regulatory affairs</li><li>Current knowledge of NAA guidelines</li><li>Analytical skills</li><li>Detail-oriented mindset</li></ul> *Only shortlisted candidates will be contacted.

Norm & Regulation Aircraft Engineer

ExecuJet Middle East is currently seeking a Lineage Flight Engineer to fill a vacancy within our Flight Operations division to be based in Dubai, U.A.E. ExecuJet delivers excellence in a comprehensive range of business aviation services tailored to our clients and partners. We are dedicated to safety and strive for creating a fulfilling workplace through cultivating genuine, open, and engaging relationships with passionate colleagues. ExecuJet Middle East is currently seeking a flight Engineer to provide Flight Engineering Support to one of our aircrafts within our fleet. Designation: Flight Engineer Reports To: Line Basis (Daily): Functional Basis:LC / PIC Continued Airworthiness Manager (CAM) Company: ExecuJet Middle East LLC Location: Dubai, UAE Qualification: Bachelors degree in aerospace engineering, mechanical engineering or related field. UAE GCAA Licence, EASA/FAA, Type ratings Work Experience (length/type): 3- 5 Years experience as flight engineer or similar role required. Background: Corporate Aviation preferred Languages: Fluency in written and spoken English. Additional languages would be advantageous. IT Skills:Basic Skills - Microsoft Office Responsibilities: -The Flight Engineer is responsible for supporting the aircraft with maintenance that is carried out before flight to ensure that the aircraft is fit for the intended flight. - Understand and ensure compliance with all relevant internal and external rules, regulations and procedures that apply to the conduct of the business in which you are involved Duties : - Carry out fault diagnosis and rectification of aircraft defects in accordance with the terms of his validation. - Communicate to the LC/PIC in a proactive manner any defects found or suspected on the aircraft, engine or accessory that may compromise safety of the aircraft schedule. -Communicate and coordinate any/all defects found on the aircraft with the contracted CAMO. - Ensure all maintenance work be carried out in accordance with the Aircraft Maintenance Manuals and the Approved Maintenance Program (AMP). - Comply with the instructions in the EJME Operations Manual (OM) and contracted CAMO's CAME. - Update aircraft FMS Database as required. - Supervise all maintenance performed by contracted AMO in accordance with the instructions/Work authorization from the contracted CAMO. - Ensure that all defects are correctly recorded in the Technical and Cabin defects log and communicated to the contracted CAMO - Ensure that all safety hazards/incidents are reported to the contracted CAMO and Operator - Take on other duties within his capacity as delegated from time to time. - Ensure individual License, Approvals, Validations, airside passes, passport, visas and vaccinations remain valid; and - Maintain the highest standards in all work practices. - Take all precautions to not work alone - especially at night or at heights without restraint equipment or proper steps with guards' - Wear appropriate PPE and abide by local/international airport and H&amp;S regulations Scope: The Flight Engineer work scope in accordance with EASA AMC 145.A.10 is limited to: - Trouble shooting. - Defect rectification. - Component replacement with use of external test equipment if required. - Component replacement may include components such as engines and propellers. - Scheduled maintenance and/or checks including visual inspections that will detect obvious unsatisfactory conditions/discrepancies but do not require extensive in-depth inspection. It may also include internal structure, systems and power plant items which are visible through quick opening access panels/doors; and - Minor repairs and modifications which do not require extensive disassembly and can be accomplished by simple means. Character Profile: Professional Flexibility Team Player/ works well without supervision Works well under pressure Proactive

Flight Engineer - Lineage 1000 Type Rated

Job Details Job Location KACC - Ardmore, OK Position Type Full Time Education Level Not Specified Travel Percentage None Job Shift Day Job Category Installation - Maint - Repair Description POSITION SUMMARY: Services, repairs, and overhauls airframe, engine, propeller, components and appliances, to ensure airworthiness by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Troubleshoots, repairs, replaces, and rebuilds structures components and appliances, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units. • Reads and interprets OEM and Supplemental Technical Manuals, service bulletins, Airworthiness Directives, local directives and other specifications to determine maintenance method and procedures. • Examines engines for component damage and security, heat damage, and fluid leaks. • Inspects turbine blades to detect Foreign Object damage or material wear or failure through visual and borescope. • Tests engine operation to locate source of malfunction or perform operational checks. • Replaces or repairs worn or damaged components such as fuel controller, starter/generators etc. • Removes engine and reinstall engine on aircraft. • Performs functional test as required. • Performs miscellaneous duties to service aircraft, including change and/or inspect fuel, and oil filters, cleaning screens, aircraft lubrication, wheel and tire maintenance such as tire changes, clean and inspect wheels and bearings. Charge and service Nicad batteries, aircraft, and engine compressor wash, cleaning and servicing on-board sanitation facilities. • Complete aircraft documentation as required IAW KACC repair station manual. Complete aircraft documentation as required IAW with customer requirements or customer GMM (CAMP cards, Flight Doc cards, and customer supplied approved task cards). TRAVEL: • Periodic travel required to King Aerospace domestic sites. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. REQUIRED EDUCATION, SKILLS AND EXPERIENCE: • Minimum Three (3) years of Boeing 737 Next Generation (737NG) experience • Eye for precision and attention to details. DESIRED EDUCATION, SKILLS AND EXPERIENCE: • High school diploma or general education degree (GED). • Airframe and Powerplant (A&amp;P) license • Airframe (A) license • Familiar with Boeing manuals • Boeing 737NG General Familiarization Course Certificate LANGUAGE ABILITY: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATH ABILITY Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. COMPUTER SKILLS: Able to become efficient in company technology and software programs. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. Regular exposed to moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, and outside weather conditions. Occasional exposure to explosives and vibration. The noise level is usually loud. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Able to consistently wear eye, hearing, foot, hand, respirator, and other protective equipment/safety gear is a necessary for this role. Able to climb ladders and stairs and work from heights (may exceed 30 ft); Ability to stand for long periods of time. Regularly required to walk, sit, stand, use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste and smell. Must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. Close vision, distance vision, color vision, depth perception and ability to adjust focus. EMPLOYMENT REQUIREMENTS: • Drug Screen • Background Check • Able to work flexible hours, overtime, and weekends when necessary. • Current, valid Driver's License King Aerospace is proud to be an Equal Opportunity Employer. As such, we provide equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, pregnancy, genetics, or any other legally protected status.

Aircraft Mechanic

JOB DESCRIPTION TITLE: Sr. Avionics Technician REPORTS TO: Manger of Line Maintenance Stations Pay tiers $38.00 to $40.00 OVERVIEW: The Avionics Technician with A&amp;P License must have knowledge of installs, inspects, tests, adjusts, or repairs avionics equipment, such as radar, communications, navigation, and instrument systems assigned Airbus A320 Family aircraft. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Troubleshoot, repair, and modify avionics, electrical and instrumentation systems installed on aircraft. • Solve complex problems by interpreting manufacturers' manuals or similar technical documents and/or drawings. • Use intricate test equipment such as, multi-trace oscilloscopes, frequency counters, multi-meters, and other avionics test equipment to perform troubleshooting and operational checks. • Perform removal, repair, installation, inspection, and operational check of system components. • Repair and/or replace components based on test results following blueprints, schematics, handbooks, and other technical documents. • Perform calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents. • Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to less experienced technicians throughout all aircraft maintenance and/or modifications efforts. • Perform other duties as assigned. Minimum Requirements: <ul><li>Must be able to obtain and maintain a SIDA badging.</li><li>Must have a valid motor vehicle driver's license.</li><li>High school diploma or equivalent required.</li><li>Five (5) years of aircraft avionics/electrical related experience required.</li><li>Must have an FAA Airframe and Powerplant (A&amp;P) License.</li><li>Possess a high degree of knowledge and expertise in aircraft electrical/avionics systems.</li><li>Demonstrates in-depth knowledge of applicable maintenance/ technical manuals and publications, and special tools and test equipment.</li><li>Must be familiar with the operational capabilities and limitations of electrical / avionics systems.</li><li>Possess a thorough working knowledge of the detection, prevention, and treatment of corrosion.</li><li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li><li>Must have basic computer data entry skills required for use of TRAX Aircraft data.</li><li>Physical Requirements/Working Environment</li><li>Requires sitting, standing, and walking for extended periods of time.</li><li>Requires frequent climbing, bending, stooping, squatting, crawling, crouching, kneeling, lifting, carrying, balancing, and reaching above shoulder level, pushing or pulling weight up to 50 pounds.</li><li>Requires eye-hand coordination and manual dexterity.</li><li>Must have close vision to include color vision, peripheral vision, depth perception, and the ability to adjust focus. Requires hearing to normal range.</li><li>May require use of respirator.</li><li>Requires shift work and a diversity of working conditions that range from a standard shop/hangar type environment, where there may be no physical discomfort, to an environment where inclement weather may subject individual to severe changes in temperature, direct sun, wind, rain, etc.</li><li>May be required to work in areas where noise hazards are prevalent.</li><li>Exposure to high intensity noise levels, extreme changes in temperature, materials identified on Material Safety Data Sheets, working on or around aircraft and machinery.</li><li>May be exposed to electrical shock hazard.</li><li>Work location is aircraft maintenance shops, hangars, and flight line.</li></ul> PHYSICAL DEMANDS: • Requires sitting, standing, and walking for extended periods of time. • Requires frequent climbing, bending, stooping, squatting, crawling, crouching, kneeling, lifting, carrying, balancing, and reaching above shoulder level, pushing or pulling weight up to 50 pounds. • Requires eye-hand coordination and manual dexterity. • Must have close vision to include color vision, peripheral vision, depth perception, and the ability to adjust focus. Requires hearing to normal range. • May require use of respirator. • Requires shift work and a diversity of working conditions that range from a standard shop/hangar type environment, where there may be no physical discomfort, to an environment where inclement weather may subject individual to severe changes in temperature, direct sun, wind, rain, etc. • May be required to work in areas where noise hazards are prevalent. • Exposure to high intensity noise levels, extreme changes in temperature, materials identified on Material Safety Data Sheets, working on or around aircraft and machinery. • May be exposed to electrical shock hazard. • Work location is aircraft maintenance shops, hangars, and flight line. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Benefits: Competitive Pay Medical Vision Dental, 401K Employee Stock Purchase Plan - (ESPP) Health Savings Account Vacation Sick time, Short Term Disability Long Term Disability positive and upbeat work environment!! Fastest Growing Charter Airline Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Sr. Avionic Technician

Job Description: bout our team... Airbus Helicopters is the world's largest helicopter manufacturer and the company's site at Oxford Airport is Britain's civil helicopter hub. AHUK offers considerable experience in helicopter sales, bespoke completions, maintenance and spares support. Its in-house engineering capabilities include design, customisation, installation, flight-testing and certification, as well as technical support, maintenance, training and the supply of spares for civil and military applications. AHUK is the MoD's chosen provider of helicopters and maintenance for its Defence Helicopter Flying School (referred to as MFTS) located in RAF Shawbury (Shropshire) and RAF Valley (Anglesey). PLEASE NOTE - It is AHUK policy to require all applicants to demonstrate they have the right to remain and to work in the UK. Description/Overall purpose of the Job UK Military Flying Training System (Rotary Wing) B2 Certifying Engineer, Shawbury Reports to UK MFTS (RW) Maintenance Operations Manager Shawbury <ul><li>The B2 Licensed Engineer is responsible for the certification of line, non-routine maintenance and repair on Airbus H135/H145 rotorcraft.</li><li>Type training will be provided for a suitable candidate.</li></ul> The main responsibilities of the post holder will be: <ul><li>Provide engineering operational support to Flight Operations.</li><li>Accomplishment of maintenance inspections and repairs as directed by nominated LAE Supervisor. </li><li>Work as a team leader and to high standards to ensure continued safe operation of the aircraft. </li><li>Completion of maintenance, including avionic and electrical systems. </li><li>Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability.</li><li>Supervision of avionic and electrical fitters and the certification of their work.</li><li>Conduct off-aircraft avionic and electrical technical work in Av workshop as required.</li><li>Also required to assist in day to day running of the aircraft Hangar, including aircraft movement and general housekeeping responsibilities. </li></ul> The post holder would ideally have the following Knowledge and Skills: ESSENTIAL <ul><li>Must have thorough knowledge of helicopter avionic and electrical systems.</li><li>Knowledge of specialised test equipment relating to avionic and electrical systems.</li><li>Must have up to date knowledge of :</li><li>CAA regulations, particularly Pt 145, Part M Continued Airworthiness Management (CAM)</li><li>Flight/Airport Operations</li><li>Aircraft Line Maintenance</li></ul> DESIRABLE <ul><li>Knowledge of UK Military Aviation and UK MFTS.</li><li>Experience with SAP and ERP software. </li></ul> We require the post holder to have the following Education, Qualifications or special training: ESSENTIAL <ul><li>CAA Part 66 B2 Licence. </li></ul> DESIRABLE <ul><li>Type Rating and experience H135/H145. </li></ul> The post holder should have the following experience: ESSENTIAL <ul><li>3 years experience in a certifying role.</li><li>Experience of Flight Operations and Line Maintenance.</li></ul> DESIRABLE <ul><li>Experience of Airbus Helicopters products.</li><li>Experience of Military Aviation.</li></ul> Key performance indicators: <ul><li> Maintain aircraft availability levels of &gt;98% at Shawbury (including deployments). </li></ul> Other requirements: TRAVEL <ul><li> Required to work shifts as part of normal working routine.</li><li>Required travel between Shawbury, Valley and areas dictated by Operational requirements (Deployments on a 3 weekly cycle).</li></ul> The Reward: In joining the Airbus family, you will play a critical part in delivering the most efficient helicopters for its customers, who serve, protect, save lives and carry passengers in demanding environments. On top of your competitive base salary, you will have access to the following benefits below via our Airbus salary sacrifice schemes: <ul><li>Private Medical Insurance (Bupa) - single cover for employees paid by the company</li><li>Pension: Employees are auto-enrolled into the Airbus Group UK Retirement Fund. Initially, AH contributes 6%, employee 4% basic</li><li>Share Incentive Plan and ESOP. Annual share schemes at company discretion.</li><li>Success Share, Discretionary Group bonus scheme (conditions apply)</li><li>Bikes to Work (up to £3,000) (employee purchase scheme)</li><li>Technology ( employee purchase scheme)</li><li>Mydrive (employee car purchase scheme)</li><li>Den-Plan (employee purchase scheme)</li><li>Health-care Cash Scheme</li><li>Personal Accident Insurance (employee purchase scheme)</li><li>Health Assessments</li><li>Travel Insurance</li><li>Financial/Legal Advice (eg, Will-writing; Lasting Power of Attorney)</li></ul> Additional requirements: Due to the nature of this position you will require DBS Security Clearance and eligible for SC clearance. "Applicants must meet any/all requirements of Export Compliance Regulation's." We reserve the right to close this vacancy early should we receive an overwhelming response. After this date the applications will then be reviewed, Feedback will be given and Interviews will be arranged. Please direct any questions relating to this job posting to <a href="mailto:contact.recruitmentahuk@airbus.com" target="_blank">contact.recruitmentahuk@airbus.com</a> in the first instance for the attention of the HR Team at Shawbury. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters UK Ltd Employment Type: Permanent Experience Level: Professional Job Family: Production means/Maintenance By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

B2 Licensed Engineer

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index. About Commercial Aerospace business ST Engineering's Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely. Job Description <ul> <li>Day to day routine maintenance &amp; rectification of aircraft defects</li> <li>Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers' requirements</li> <li>Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department</li> <li>Assisting in the forecasting of manpower, spares &amp; equipment needs</li> <li>Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition &amp; operation</li> <li>Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented</li> <li>Ensuring that tools &amp; equipment under his control are properly maintained, calibrated and correctly used for the jobs</li> <li>Ensuring action is taken at all times to maintain the aircraft on schedule</li> <li>General supervision, control &amp; discipline of staff under his charge</li> <li>Performing other duties, as and when required</li></ul> Job Requirement <ul> <li>Posseses relevant Licences from the Aviation Authority, with at least 3 years of relevant working experience Suitably Rated in B787, B777, B767 or A350</li> <li>Good communications and interpersonal skills</li> <li>Meticulous and organized</li></ul>

Licensed Aircraft Engineer

POSITION SUMMARY The Aircraft Maintenance Technician will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. This position will be based in Milan, Italy at Milan Linate Airport. DUTIES &amp; RESPONSIBILITIES <ul> <li>Perform all airframe and powerplant repairs and modifications required to meet company and regulatory requirements</li> <li>Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system</li> <li>Operate all power tools and equipment necessary to accomplish job assignments</li> <li>Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned</li> <li>Must support all company policies and safety programs to include OSHA and EPA regulations</li> <li>Interpret technical manuals, drawings and blueprints</li> <li>Present a clean and neat work area</li> <li>Demonstrate professionalism and deliver satisfaction to the internal/external customer</li> <li>Perform other related duties &amp; responsibilities as assigned</li></ul> EDUCATION &amp; EXPERIENCE <ul> <li>B1 or B1/B2 License</li> <li>B1.3 for rotary aircraft desired</li> <li>UK CAA and EASA License</li> <li>Proven experience directly related aviation experience (corporate aircraft experience preferred)</li> <li>Type ratings on GVI, EMB550 and S76 desired</li> <li>Good working knowledge of EASA/UK CAA: Part 145, Part M, Part CAMO, Part 21</li></ul> REQUIRED SKILLS <ul> <li>Must possess the legal ability to work in Europe and/or the UK and have the ability to travel in and out of the UK/EU and US and to all cities/countries where Flexjet serves.</li> <li>Successful candidate will be highly motivated and work effectively under pressure and time constraints</li> <li>Must have the ability to multi-task within a team environment</li> <li>Strong working knowledge of Windows and MS Office programs</li> <li>Possess proven inspection competencies</li> <li>Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude</li> <li>Successful candidate will ideally have own set of hand tools. Specialized aircraft tooling will be furnished by the company</li> <li>Must maintain a valid driver's license</li></ul> WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to: <ul> <li>Stand; walk; use hands to handle or feel; and reach with hands and arms</li> <li>The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl</li> <li>The employee must frequently lift and move up to 5Kg and occasionally lift and move up to 22.5 KG</li> <li>Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.</li></ul>

Flexjet Europe Aircraft Maintenance Technician

Coulson Aviation Australia is a subsidiary of global aerial firefighting company, Coulson Aviation, and supports Australian States and Emergency Service Organizations with the provision of aircraft and experienced team members. Coulson Aviation operates across the world with a fleet of large aerial firefighting assets consisting of both fixed-wing and rotary-wing aircraft. With our fleet of Boeing 737 FIRELINERS™ and C-130 Hercules fire bombers, Citation and King Air fire support platforms, CH47D Chinooks, UH60 Blackhawks and Bell 412 helicopters, we provide rapid response capabilities using aviation assets. Coulson Aviation Australia operate and manage New South Wales Rural Fire Service-owned aircraft in all aspects of maintenance, fleet support systems and management, and operating personnel. Our teams perform aerial firefighting missions, transport flights, intelligence and scanning missions, disaster mitigation, search and rescue operations, and related activities. For more information about Coulson Aviation Australia visit <a href="http://www.coulsonaviation.com.au" target="_blank">www.coulsonaviation.com.au</a> WHAT WE'RE LOOKING FOR: We are currently recruiting qualified Licensed Aviation Maintenance Engineers (LAME) to be part of our team! The chosen candidates will work in a team environment performing maintenance and engineering activities in support of aerial emergency response services. They must have a strong focus on safety and customer service. The role requires flexibility and working away from home base at short notice and offers competitive salary and an emphasis on work/life balance. Duties and Responsibilities: <ul> <li>Perform daily, scheduled and unscheduled maintenance on customer-owned aircraft ensuring compliance with company procedures and regulatory requirements</li> <li>Diagnose and rectify mechanical and electrical issues as appropriately qualified to ensure aircraft safety and airworthiness of aircraft and role equipment</li> <li>Supervising unlicensed engineers, apprentices and/or contractors as and when required</li> <li>Maintain detailed and accurate maintenance documentation of all work performed.</li> <li>Support operations of emergency service aircraft to ensure effective response to missions</li> </ul> Experience Requirements: <ul> <li>CASA B1.1 or B2 License</li> <li>2 or more years of experience working in Australia as LAME</li> <li>Ability to obtain an ASIC Clearance</li> <li>Ability to obtain RAAF Base Access</li> </ul> Desirable Qualifications/Experience: <ul> <li>Type Rating:<ul> <li>Boeing 737; and/or</li> <li>Beechcraft King Air 300 Series; and/or</li> <li>Cessna Citation 550/560</li> </ul> </li> <li>FAA Airframe and Powerplant (A&amp;P) License</li> <li>No Exclusions on CASA License </li> <li>Aerial Fire Suppression maintenance experience</li> </ul> We would like to thank all applicants in advance for their interest; however, we can only consider applicants that are residents of Australia and legally eligible to work in Australia. Department Maintenance Locations Richmond, NSW, Australia

194 Technical and engineering Not specified Jobs