field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Do you want to be responsible to perform and certify the inspections, repairs, and testing of aircraft interior equipment to ensure the aircrafts are in a safe operating condition? If so, this job was made for you! We are looking forward to your application! Tasks As the Senior Aircraft Mechanic, you will perform the following duties: <ul> <li>Perform aircraft maintenance tasks including all required adjustments, inspections, repairs, and functional tests. All tasks shall be done independently and autonomously</li> <li>Responsible to determine whether supervision or inspection is necessary for mechanics. (excluding RII Inspections defined by customer)</li> <li>Perform, inspection and sign off all tasks on all types relevant in their facility (type group) in "Insp/Attest by" column inside their area of authorization</li> <li>Deputize as a Team Leader if required or on request</li> <li>Carry out work in accordance with the applicable OEM Manuals, practices, approved procedures, documents and FAA regulations and requirements and RSQCM manual</li> <li>Troubleshooting and evaluation of systems on the aircraft when designate</li> </ul> * Takeover of additional tasks when is required Requirements To thrive in this role, we value a combination of the following requirements: <ul> <li>Airframe and Power plant degree or a related degree from an FAA-approved school</li> <li>Minimum of three (3) or more years of applicable aircraft maintenance experience is required</li> <li>Trained or have the knowledge and experience in the performance of maintenance, preventive maintenance, or alterations authorized by the repair station certificate and operations specifications to ensure all work is performed in accordance with part 43 (See, 14 CFR § 145.151)</li> <li>Capacity for intercultural competence; capacity for teamwork, capacity to work under pressure</li> <li>Thoroughly familiar with the applicable regulations, RSQCM manual, Repair Station Training Program, and the IQ MOVE processes used by LTPR for ensuring work is performed properly</li> <li>Good verbal communication skills in English and Spanish</li> </ul> * CV/Resume required About Lufthansa Technik Puerto Rico LLC. Lufthansa Technik Puerto Rico is a 5 bay maintenance facility specialized in the maintenance, repair and overhaul (MRO) of the Airbus A320 family aircraft. We are strategically located in Aguadilla, Puerto Rico where we provide support for customers from both North and South America. Our success is built on our employees who are fundamental to our organization by performing a world-class service. Lufthansa Technik Puerto Rico was founded in 2014 and is a fully owned company of the Lufthansa Technik Group - the world's leading provider of maintenance, repair and overhaul services as well as modifications to the civil aviation industry. With tailor-made maintenance programs and advanced repair techniques, we ensure the reliability and availability of our customers' aircraft fleets. We are independent of aircraft manufacturers and licensed internationally as a repair, manufacturing and development organization. With more than 26,000 employees and over 30 international subsidiaries, the Lufthansa Technik Group offers a full range of services in the fields of maintenance, overhaul, component support, engines, landing gears, VIP services, innovation and digital fleet solutions to around 800 customers worldwide.

Senior Aircraft Mechanic

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at <a href="mailto:USCareers@airbus.com" target="_blank">USCareers@airbus.com</a> <ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminacion (Spanish)</li></ul> Job Description: Airbus Commercial Aircraft is looking for a Composite Engineer - Stress &amp; Design to join our Engineering department based in Wichita, Kansas. You will be part of a team that supports the design and development of aircraft structures, systems, and repair solutions. Duties include performing analysis/design efforts for non-metallic parts while working in close collaboration with colleagues. Methods include the use of multiple applications to develop solutions to satisfy requirements. Meet the team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your working environment: Located on the Wichita State University (WSU) innovation campus is Airbus' first dedicated engineering facility outside of Europe. Our team of 200+ support staff and engineers focus on aerostructure design including analysis of aircraft primary structures, such as wings and fuselages, for all major Airbus products across the globe. How we care for you: <ul><li>Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP")</li><li>Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.</li><li>Health &amp; Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.</li><li>Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</li></ul> At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: <ul><li>Perform analyses to assess that structural integrity requirements have been met using standard hand and computer methods.</li><li>Document analyses in support of trade studies or detail drawing sign-out for airframe structure.</li><li>Ensure all tasks and activities required are correctly planned, monitored and executed to achieve customer time scales.</li><li>Identify and support local improvement initiatives to increase team efficiency through process, methods and tools improvements.</li><li>Liaise with appropriate Airbus departments to come up with optimum solutions.</li><li>Liaise with other engineers in order to ensure that methods, assumptions, data and procedures reflect on-going developments.</li><li>Provide mentoring for new team members.</li></ul> Your boarding pass: <ul><li>Bachelor of Science (BS) Degree in Engineering (Aero, Civil, or Mechanical) with a strong curriculum emphasis on structural design and analysis, and/or mechanics of materials</li><li>Minimum 9 years total structure analysis experience in airframe design/repair programs</li><li>Experience in composite aircraft structure (airframe)</li><li>Ability to work in a dynamic team environment.</li><li>Ability to interpret and follow verbal and written instructions.</li><li>Ability to read, analyze, and interpret technical procedures.</li><li>Ability to read and interpret engineering drawings and bill of material systems.</li><li>Ability to write reports and business correspondence.</li><li>Dependable, self-motivated and accessible.</li><li>Knowledge of maintenance repair shop practices, equipment and capabilities.</li><li>A strong computer background, including MS Office application experience (Outlook, Excel, Word, PowerPoint) and Google Suite application experience (Docs, Sheets, Slides, Gmail).</li><li>Authorized to Work in the US</li><li>Prefer experience with A350, A220 Pylon or other Airbus commercial aircraft.</li></ul> Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Customer Eng.&amp;Technical Support&amp;Services Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>.

Composites Engineer - Stress & Design

About Us Skydweller Aero Inc. is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is developing a new class of unmanned aircraft, providing the persistence of geosynchronous satellites with the powerful sensing capabilities and the flexibility of a large, airborne platform. Skydweller Aero Inc. has World and US headquarters in Oklahoma City and European offices headquartered in Spain. Job Description <ul><li>The open position if for a Senior composite technician with demonstrated experience in aeronautical composite components.</li><li>Technician will perform all tasks assigned by the manufacturing engineering team and/or the design office.</li><li>Technician will be required to sign for work order accomplished including troubleshooting deviations and ensure proper recording of all manufacturing tasks on company documents.</li><li>Properly tag and store all the parts manufactured.</li><li>Attend all training courses as assigned.</li><li>Comply with all company rules, regulations, and procedures set forth in company manuals and policies.</li><li>Keep a constant watch for safety, excessive cost of labor duplication, ensure proper and adequate equipment is used, acceptable parts or equipment arriving from suppliers.</li><li>Coordinate with manufacturing engineer or design &amp; stress engineers to meet the level of quality and requirements fulfillment.</li><li>Technician will be responsible for keeping the work area clean and may be required to maintain or repair company property from time to time.</li><li>Wet lay-up and prepreg lamination.</li><li>Curing cycles with oven and thermal blankets</li><li>Knowledge on PPE and consumables</li><li>Experience with low fiber areal weight prepreg will be positively evaluated.</li><li>Availability to travel to US.</li><li>Good Level of written and spoken English</li></ul> Required Qualifications <ul><li>High School Diploma or GED</li><li>Carbon fiber repair experience</li><li>Minimum of 4 years maintenance experience on composite aeronautical parts fabrication. </li><li>Other Preferred Qualifications</li><li>EASA Aircraft maintenance license B2 and/or B1</li><li>Wiring list and drawing, work experience</li><li>Harnesses manufacturing and on a/c integration experience</li><li>Pin to pin troubleshooting experience.</li></ul> Preferred Tools / Process Experience <ul><li>Office tools</li></ul> Search Keywords <ul><li>Mechanic</li><li>Laminator</li><li>Composite Technician</li><li>B1</li><li>B2</li></ul> Please Note: <ol><li> Please ensure your resume (CV) is in English.</li><li> Also please do not have more than one job application, rather apply to one position and refer to other positions that you are interested in, in the NOTES section.</li><li> Since BambooHR is a 3rd party software, please always check your spam folder for our responses.</li></ol> Company Benefits 1. Health insurance: We offer health insurance to all FTEs, which can include medical, dental, and vision coverage. 2. Paid time off: This includes vacation time, sick leave, and personal days. 3. Flexible schedules: we offer flexible schedules; we help employees achieve a better work-life balance. 4. Professional development opportunities: we may offer training, educational opportunities, or tuition reimbursement programs to help employees develop their skills and advance their careers. 5. Wellness programs: we offer wellness programs that promote healthy living and can include things like gym memberships, nutrition counseling, or stress-management classes. 6. Flex Remuneration. 7. Meal Vouchers. 8. Stock options: all FTEs after one year of seniority may have the opportunity to receive options as part of their compensation package. 9. Bonuses: we offer bonuses or other forms of performance-based compensation to reward employees for their hard work and achievements. 10. Fruits and soft drinks in the office.

Senior Composite Technician

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at <a href="mailto:USCareers@airbus.com" target="_blank">USCareers@airbus.com</a> <ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminacion (Spanish)</li></ul> Job Description: Airbus US Manufacturing Facility is looking for a Quality Maintenance Technician A320 Flightline Avionics to join our Quality Department based in Mobile, AL The Quality Maintenance Technician is responsible for the planning, execution and verification of the Quality activities in the Flightline phase, starting from the milestone FOT in the FAL to the final delivery to the customer. This includes the demonstration of aircraft system integrity and conformity in accordance to the design specification by the verification of ground test instruction (GTI). Meet the team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. late innovative thinking. How We Care for You: <ul><li>Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP")</li><li>Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.</li><li>Health &amp; Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.</li><li>Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</li></ul> Your Challenges: <ul><li>Release the aircraft for all ground and flight operations (Engine Run-up Inspections, Pre and Post flight checks under EASA Part 21G and after the transfer of title under FAA 14 CFR Part 145).</li><li>Perform aircraft testing; evaluate results by documenting the tests performed and any discrepancies in the Airbus Log Book (ALB) of the aircraft.</li><li>Support and perform troubleshooting (T/S) on aircraft avionic systems.</li><li>Support improvement measures, Clarify problems with engineering, customers and suppliers.</li><li>Ensure aircraft conformity as a Quality Inspector with final signature authorization.</li><li>Delegation of the flight test department (IVR): Perform aircraft ground checks after FOT. Prepare the aircraft and test environment for ground tests on all aircraft systems. Document any nonconformity in the Airbus Log Book (ALB) and request a repeat test instruction (RTI) after finalization of the rework. This qualification requires extensive training and will be initiated after the above mentioned Inspector qualification.</li><li>Perform ground checks; static system tests, APU run, low and high power engine run, low speed taxi and compass swing in accordance with the Production Aircraft Test Manual (PATM).</li><li>Perform aircraft testing; evaluate / document results of the tests performed and any discrepancies in the Part 145 Work Package of the aircraft.</li><li>Support and perform troubleshooting (T/S) on aircraft avionic systems.</li><li>Maintain Part 145 Work Package and perform Release to Service</li></ul> Your boarding pass: <ul><li>High School Diploma or equivalent</li><li>Airbus A320 T1 &amp; T2 training preferred</li><li>3 years of Quality Inspection experience preferably on A320 Family aircraft in an aviation company</li><li>Experience in troubleshooting Avionic/Airframe/Powerplant Systems</li><li>Flightline experience preferred</li><li>Leadership experience</li><li>Knowledge of drawing systems, inspection plans and inspection processes</li><li>Knowledge of inspection principles, practices, methods and tools used on the production line</li><li>Knowledge of rules for aircraft design and manufacturing</li><li>Extensive knowledge on A320 Family Avionic Systems</li><li>Knowledge of drawing systems, inspection plans and inspection processes</li><li>Knowledge of inspection principles, practices, methods and tools used on the production line</li><li>Knowledge of rules for aircraft design and manufacturing</li><li>Extensive knowledge on A320 Family Avionic Systems</li></ul> Licensure/Certifications: <ul><li>FAA issued A &amp; P or EASA Part 66 license preferred (for FAA 14 CFR Part 145 activities after Transfer of Title)Licensure/Certifications: or substantial portfolio of documented aircraft maintenance experience, (airframe and powerplant)</li></ul> Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: Permanent Experience Level: Entry Level Remote Type: On-site Job Family: Quality Inspection Job Posting End Date: 01.31.2025 Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>.

Quality Maintenance Technician A320 Flightline Avionics

Licenced B1 Engineer Department: Production Part 145 Employment Type: Full Time Location: Hangar 2 Shannon Description With over 60 years of experience, Shannon based Atlantic Aviation Group (AAG) is one of Europe's leading independent aviation solution providers. The company has a strong reputation of providing customers with a complete range of solutions including; aircraft maintenance &amp; modifications, technical, engineering and design services, logistics and material solutions and international training. This reputation is built on a proud history and tradition of superior craftsmanship, technical expertise and continuous training, which is supported by our flexible, open and partnership-based customer relationships. The company provides a range of aviation solutions including; Part 145 Aircraft Maintenance, MAA Part 145 Aircraft Maintenance (AAG Defence Services), CAMO &amp; Technical Services, Part 21 Design Services and EASA Part 147 Training provides aviation training to airlines, MRO's and companies around the world. AAG have an exceptional opportunity for a highly-motivated career focused and ambitious Licenced B1 Engineer seeking a role in a challenging, fast-paced and rewarding environment. Our aim as a team is to attract and develop key talent across all levels of our growing aviation business. Duties and responsibilities are, but not limited to the following: Licenced engineers have responsibility for ensuring that maintenance actions are performed, certified and recorded accurately. Any individual performing/certifying maintenance on an aircraft has responsibilities which include but are not limited to; <ul><li>Using applicable current maintenance data, work order instructions and information systems.</li><li>Documenting the performance of all maintenance actions, compiling and controlling completed work cards.</li><li>Following the procedures detailed in the MOE and supporting manuals.</li><li>Identifying and rectifying existing and potential unsafe conditions.</li><li>Adhere to safety and deactivation/reactivation requirements.</li><li>Following the procedures detailed in a customers' approved documentation.</li><li>Using calibrated tooling and equipment recommended by the manufacturer.</li><li>Maintaining the work environment in a clean and safe manner.</li><li>Complying with the Atlantic Aviation Group internal and mandatory reporting requirements.</li><li>Applying good communication and assertiveness skills.</li><li>Complying with the work interruption and handover procedures.</li><li>Complying with the Atlantic Aviation Group safety policy requirements.</li><li>Sign off maintenance tasks performed or supervised within the scope of their staff authorisation.</li><li>Sign certificates of release to service within the scope of their certifying staff authorisation issued.</li><li>Performance of the functions and responsibilities associated with support staff role within the scope of the authorisation issued.</li><li>Maintain experience records in support of continued competence</li></ul> In conjunction with the general responsibilities as outlined above the licenced engineer individual's responsibilities include; The base maintenance support staff role shall ensure that all relevant tasks or inspections have been carried out to the required standard before the category C certifying staff issues the certificate of release to service. <ul><li>Confirm that each item/task of work has been documented and actioned.</li><li>Prior to closing any area or panel of the aircraft, an inspection is carried out for</li><li>the absence of dirt, extraneous matter, tools etc.</li><li>Plan performance of critical tasks.</li><li>Determine required qualifications for task performance.</li><li>Consider human performance and limitations during performance of maintenance.</li><li>Ensuring that all discrepancies detected as a result of scheduled inspection task, duplicate/RII inspections, critical task inspection and non-routine maintenance rectification are documented and rectified in accordance with Atlantic Aviation Group procedures.</li><li>Supervising the maintenance activities being performed within their zone of inspection responsibility to ensure that tasks are performed and completed to the standards laid down in the Atlantic Aviation Group MOE.</li><li>Responsible for the maintenance and preventive maintenance of aircraft, components and equipment (when required).</li><li>Completes any other reasonable tasks or duties as requested by the Production Management team</li></ul><ul><li>Must be able to use ladders, work stands, lifts, etc. and be able to work on all areas of the aircraft that may require access during performance of duties.</li><li>Must be comfortable working at heights and confined spaces.</li><li>Physical exertion such as: pulling, pushing, reaching, bending, standing, walking and light lifting of boxes, bags, files and electronic equipment.</li><li>Must satisfy and maintain the required medical standard.</li><li>Work is performed at the AAG Hangar in Shannon and possibly offsite providing AOG support.</li><li>PPE is provided by AAG and its use is mandatory in the performance of your work.</li><li>May be requested to work nights, weekends, holidays and overtime, as necessary.</li><li>Must satisfy and maintain airport security requirements</li></ul><ul><li>Licenced engineers should hold or have held an EASA PART 66 B1 Aircraft Maintenance License and company base maintenance approvals on the specific aircraft with at least 6 months suitable experience.</li><li>One or more of the following type ratings; 737 (CL or NG), 757 and/ or 767.</li><li>Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail.</li><li>A strong work ethic, reliable, self-motivated with a positive attitude, and very customer service oriented</li><li>Required to work nights, weekends, holidays and overtime, as necessary.</li><li>Ability to read, write, speak and understand English</li></ul> Closing Date If you feel your skills and experience meet the requirements of this position, we look forward to hearing from you! Closing date for applications: 09 /09 / 24 Atlantic Aviation Group reserves the right to close the role prior to this date should a suitable applicant be found. As a growing and ambitious organisation, we are always interested in speaking to individuals about their next career move. If this is not the right position for you but you would still like to find out more about working for Atlantic Aviation Group, please contact us. Atlantic Aviation Group is an equal opportunities employer. The people of Atlantic Aviation Group are the foundation of its success and we believe that employing a diverse workforce is key to this success. As an equal opportunity employer, we will consider all suitably qualified applicants regardless of nationality, religion, ethnic origin, gender identity or expression, religion or beliefs, age, sexual orientation, or disability. We value your passion, energy, and creativeness. One of our company values is to provide a people focussed environment with a strong sense of community, where individuals feel safe, valued, and engaged. We are committed to accommodating individuals with disabilities through our recruitment process and encourage any candidates to tell us about any adjustment requirements. Atlantic Aviation Group does not accept unsolicited CVs from 3rd party recruitment agencies without a written agreement in place. Atlantic Aviation Group is not responsible for any fees related to unsolicited CVs and no fee will be paid should the candidate be hired by Atlantic Aviation Group. Our full data privacy notice outlining how data will be processed as part of the application procedure for applicable locations is available here: Privacy Policy - Atlantic Aviation Group. By submitting your application, you are agreeing to our use and processing of your data as required.

Licenced B1 Engineer

Job Profile Vista Aircraft Maintenance is the in-house maintenance provider for the Vista Members' fleet, which comprises over 300 light, super mid-size, long-range and ultra-long-range aircraft. Vista Aircraft Maintenance has multiple maintenance hubs strategically located across the U.S. and Europe. By investing in internal maintenance, Vista is able to prioritize the highest standards of service, safety, security, reliability, and value, demonstrating a continued commitment to providing a seamless service to clients globally. Vista Aircraft Maintenance offers a robust regional support network for Vista's growing fleet, with one the leading base maintenance facilities in the world, taking care since 2004. Due to expansion, we currently have vacancies for EASA / CAA Licenced Engineers to join our Line/MRT team. We are looking for people who are flexible in their hours worked, willing to deploy at short notice on overseas trips, but most importantly of all, team players. We work in a fast paced, ever changing environment, operate at airports around the UK and on MRT (Maintenance Recovery Team) to recover aircraft within our fleets all around Europe &amp; ROW. You will be reporting to the Line Maintenance Manager. Your Responsibilities <ul><li>Ensuring compliance with Part 145 Safety and Maintenance procedures at all times, challenging any unsafe acts and pursue improvements in safety culture and behaviour;</li><li>Always presenting a professional and respectful attitude to both VistaJet employees and customers;</li><li>Carrying out Aircraft Maintenance i.a.w. approved and up to date maintenance instructions in a safe and professional manner;</li><li>Collaborating closely with Part 145 management team to ensure maintenance expectations are managed, understood and delivered across all boundaries;</li><li>Liaising with VistaJet MOC and other internal and external stakeholders as required to ensure all support solutions are effectively explored and delivered;</li><li>Working closely with the Part 145 management team to assist in the development and implementation of company maintenance strategy.</li></ul> Required Skills, Qualifications, and Experience <ul><li>An experienced line orientated Aircraft Engineer;</li><li>Holds a minimum of a. EASA B1 license, but preferably holding a EASA B1 &amp; B2 license;</li><li>Approvals and recency on Bombardier Global Series or Challenger 850 / 605 / 350.</li></ul>

Line Maintenance Engineer

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary "Together We Rise" It's great to know you're making a difference to the future of aviation! Whatever part you play you'll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant you'll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt &amp; Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. As a member of the Manufacturing Engineering Team, the Manufacturing Engineer will report to the Manufacturing Engineer Manager and be based at our Luton site, occasional travel to visit suppliers will be required. The Manufacturing Engineer will work on several value streams within the IPS (Ice Protection Systems) programmes developing new and existing manufacturing processes whilst supporting the day-to-day operations team at Luton. Job Responsibilities • Develop, document and optimise new and existing manufacturing processes such as creation/amendment SOP (Standard Operating Procedure) and P spec (Process Specification) • Create and update engineering documentation to maintain configuration control and help manage point of introduction activities, first article inspection and customer approval • Lead structured problem solving projects linked to both project deliverables and day-to-day manufacturing issues • Provide day-to-day support to manufacturing operations • Provide MRB (Material Review Board) support to existing programmes to ensure any process deviation or product faults are reviewed and answered • Reduce process driven scrap and rework and support continuous improvement activities • Establish appropriate new process controls and improve existing ones • Be compliant with the Company's Environmental, Health &amp; Safety and Energy procedures Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday &amp; 07:30 - 12:30 Friday. How You'll Contribute To help us make a difference, you'll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: • Minimum HND (or equivalent) in Mechanical, Electrical, Industrial or Manufacturing Engineering/Aerospace • Manufacturing Engineering experience gained from the Aerospace, Automotive or FMCG industries • Demonstrable experience of practical problem-solving techniques using A3 or 8D • Experience of root cause analysis using Fishbone (Cause and Effect) Diagrams and 5 Whys (Five Whys) techniques • Experience of Lean Manufacturing including process standardisation kaizen activities such as 5S or Value Stream Mapping Desirable: • Experience in lay-up processes for composite materials • Experience of Material Review Board • Customer specifications experience • Aerospace industry standards interpretation experience • Experience in APQP and PAPP standards including Process Flow Diagram, Process Failure Mode Effect Analysis, Process Control Plans, Measurement System Analysis and Process Capability We are looking for people who want to make a difference, talented members with the skills and passions to become the best of the future in what they do. The Manufacturing Engineer will have the ability to communicate effectively at all levels within an organisation and be flexible in your approach. The successful person will have a hands-on/can-do attitude to collaborate with multiple departments to improve manufacturing processes. What We'll Offer Once you're on board you'll get the following perks and benefits: • Competitive salary dependent on experience • Industry Leading Pension Scheme = we'll match your contributions up to 8% on a 1 : 1.5 basis • Life Assurance 8 x salary • 185 hours holiday + bank holidays • Income protection • Shopping discounts • Cycle To Work Scheme • Employee Assistance Programme • Virtual GP Clinic for you and immediate family • Free onsite parking • Local gym discount • 50% off local travel card • Free airport Dart • Free airport parking • Enhanced family friendly leave • A collaborative, dynamic working environment Join us and keep the world moving ... click on the link below to apply #LI-ONSITE #LI-CH1 We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

Manufacturing Engineer

Job Description: Airbus International Services (AIS) is a subsidiary wholly owned by Airbus Helicopters, the world-leading rotorcraft manufacturer. AIS is based in Dublin, Ireland. Airbus Helicopters' first priority is to support flight safety for the thousands of men and women around the world who are transported in our aircraft every day. All of Airbus Helicopters' activities are focused on meeting and exceeding industry and regulatory safety standards and supporting the safe operation of aircraft fleet from design, engineering and production, to maintenance, training and partnerships. AIS's Technical Support activity offers versatile and innovative solutions to our customers regulatory and business needs. Our strong customer-focused ethic coupled with our reactivity and flexibility will help our customers excel. Roles and responsibilities The LAME role and responsibility is to provide Airbus Helicopters worldwide customers with Technical Assistance for their helicopters fleet. The LAME are mechanical: B1.3 and avionic: B2 specialists type rated type of airbus helicopters on one at least or several Airbus helicopters type The LAME holds an EASA Part 66 in order to provide technical support as follow: <ul><li>Perform scheduled and unscheduled maintenance tasks in accordance with applicable and approved documentation (AMM / RDAS / SB / other OEM documentation, )</li><li>Rectification of all defects reported.</li><li>Ensure zero defect post inspection/retrofit.</li><li>Provide field services support locally</li><li>Carry out on-the-job training of customer's personnel, when requested</li><li>Answer to questions asked by on-site customers related to the performance of the maintenance tasks (iaw. the agreed maintenance plan),</li><li>Give feedback in the set-up of the maintenance planning (monthly and weekly planning),</li><li>Assist customer's maintenance personnel in understanding and in the use of technical publications, work report &amp; work order from Part M</li><li>Ensure, when applicable, that quality regulations are met during maintenance activities.</li></ul> NOTE: The LAME can work in an AH/AIS team and therefore will liaise at all time with the AH/AIS Head of Mission on site The LAME can work as a detached technician at customer premises and therefore report to technical point of contact. The LAME can be a Certified Staff in some appropriate organization It is expected these personnel to be fully qualified thus have a strong knowledge of Part 145 activity These maintenance technicians could be required to sign off the relevant End user's official documents and in accordance with the customers Regulations, for the specific tasks executed by them. Soft Skills <ul><li>Excellent communication skills &amp; ability to work on own initiative</li><li>Availability for customer. Customer care minded, availability during out of working hours.</li><li>Adaptable and professional / positive behaviour</li><li>Customer satisfaction oriented</li><li>Leadership and autonomy.</li><li>Emotional intelligence</li><li>Problem solving mind set and innovative</li><li>Strong organizational awareness</li><li>Languages: English required; any other local languages could be a plus</li><li>Computer skills</li></ul> Experience /Education <ul><li>Technical school diploma.</li><li>10 years or more working experience on Helicopters / Airbus product</li><li>License Part 66 with one or multiple entries / Type Rating</li><li>Airbus Helicopters Type Rating is a must</li><li>HF / Part 145 / FOD initial and recurrent training valid</li></ul> Requirements <ul><li>Driving license</li><li>Passport validity more than 6 month</li><li>No criminal records</li></ul> This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters International Services Designated Activity Company Employment Type: Permanent Experience Level: Professional Job Family: Customer Eng.&amp;Technical Support&amp;Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Licensed Aircraft Maintenance Engineer (mechanical: B1.3 and avionic: B2)

Job Description: Mission: This is a position located in Ireland, but the role could involve International mobility. The candidate will be responsible for the performance of both scheduled and unscheduled maintenance of the customer's C295 fleet, as part of the Maintenance Department in a timely fashion and meeting the delivery quality requirements of the Customer's Maintenance Organization. Responsibilities: <ul><li>Working as part of a team, specific duties will include the satisfactory performance of both scheduled and unscheduled maintenance in the C295 fleet, within a Customer Services environment.</li><li>Undertaking individually or as part of a team, aircraft maintenance, repair and inspection tasks, quality checks and the completion of documentation in accordance with Company and Customer procedures.</li><li>Performing duties as assigned by the Team/Shift Leader, ensuring that all work is completed in a timely fashion and meets the delivery quality requirements of the Customer's Maintenance Organization.</li><li>Verify that the aircraft status regarding scheduled tasks and deferred items is updated, the aircraft condition is serviceable and sign the Release to Service of the aircraft</li><li>Ensuring that all work performed is recorded on the appropriate paperwork and signed for on a progressive basis</li><li>Ensuring the correct use and control of aircraft parts and materials.</li><li>Checking every time before to start any maintenance activity tools/GSE s for condition and expiration date, and ensure their correct use.</li><li>Checking every time before starting any maintenance activity the components and parts for conditions (damages, leaks etc.) and that the applicability of the documentation is correct</li><li>Adhere to all company, regulatory and Health and Safety procedures.</li></ul> Requirements and qualifications <ul><li>FAA or EASA Part-66 B1/B2 licensed aircraft technician. ICAO licenses will also be considered</li><li>C-295 Aircraft Maintenance Type Training Course, by approved Part 147</li><li>More than two (2) years of experience in C-295 aircraft maintenance in the last six (6) years</li><li>At least three (3) years of aeronautical experience.</li></ul> Knowledge and Skills: <ul><li>Negotiation level at English language (Technical &amp; Aeronautical)</li><li>Proven problem solving and decision making skills</li><li>Ability to work within a team</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Highest standard in terms of quality, reliability and safety.</li></ul> Desirable Requirements <ul><li>Airbus C295 Engine Run Up Course certificate</li><li>C295 ISR Mission Systems Maintenance Course</li><li>Operational ISR Aircraft Maintenance relevant experience</li><li>PW 127G Engine Boroscope Inspection capability</li><li>Previous experience of working in a military environment</li></ul> This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters International Services Designated Activity Company Employment Type: Fixed term Experience Level: Professional Job Family: Customer Eng.&amp;Technical Support&amp;Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

MRO Network C295 B1/B2 Technician (Long Fixed-term, Ireland)

Job Description: Airbus International Services (AIS) is a subsidiary wholly owned by Airbus Helicopters, the world-leading rotorcraft manufacturer. AIS is based in Dublin, Ireland. Airbus Helicopters' first priority is to support flight safety for the thousands of men and women around the world who are transported in our aircraft every day. All of Airbus Helicopters' activities are focused on meeting and exceeding industry and regulatory safety standards and supporting the safe operation of aircraft fleet from design, engineering and production, to maintenance, training and partnerships. AIS's Technical Support activity offers versatile and innovative solutions to our customers regulatory and business needs. Our strong customer-focused ethic coupled with our reactivity and flexibility will help our customers excel. Roles and responsibilities The LAME role and responsibility is to provide to the Belgium Military with Technical Assistance across their NH90 fleet. The LAME is avionic: B2 specialists type rated type of airbus helicopters on one at least or several Airbus helicopters type. The LAME holds an EASA Part 66 in order to provide technical support as follow: <ul><li>Perform scheduled and unscheduled maintenance tasks in accordance with applicable and approved documentation (AMM / RDAS / SB / other OEM documentation,)</li><li>Rectification of all defects reported.</li><li>Ensure zero defect post inspection/retrofit.</li><li>Provide field services support locally</li><li>Carry out on-the-job training of customer's personnel, when requested</li><li>Answer to questions asked by on-site customers related to the performance of the maintenance tasks (iaw. the agreed maintenance plan),</li><li>Give feedback in the set-up of the maintenance planning (monthly and weekly planning),</li><li>Assist customer's maintenance personnel in understanding and in the use of technical publications, work report &amp; work order from Part M</li><li>Ensure, when applicable, that quality regulations are met during maintenance activities.</li></ul> NOTE: The LAME can work in an AH/AIS team and therefore will liaise at all time with the AH/AIS Head of Mission on site The LAME can work as a detached technician at customer premises and therefore report to technical point of contact. The LAME can be a Certified Staff in some appropriate organization It is expected these personnel to be fully qualified thus have a strong knowledge of Part 145 activity These maintenance technicians could be required to sign off the relevant End user's official documents and in accordance with the customers Regulations, for the specific tasks executed by them. Soft Skills <ul><li>Excellent communication skills &amp; ability to work on own initiative</li><li>Availability for customer. Customer care minded, availability during out of working hours.</li><li>Adaptable and professional / positive behaviour</li><li>Customer satisfaction oriented</li><li>Leadership and autonomy.</li><li>Emotional intelligence</li><li>Problem solving mind set and innovative</li><li>Strong organizational awareness</li><li>Languages: English required; any other local languages could be a plus</li><li>Computer skills</li></ul> Experience /Education <ul><li>Technical school diploma.</li><li>10 years or more working experience on Helicopters / Airbus product</li><li>License Part 66 with one or multiple entries / Type Rating</li><li>Airbus Helicopters Type Rating is a must</li><li>TTH 90 / NFH 90 Type rating</li><li>HF / Part 145 / FOD initial and recurrent training valid - Recommended</li></ul> Requirements <ul><li>Eligible for NATO clearance (restricted documents consulting)</li><li>Driving license</li><li>Passport validity more than 6 month</li><li>No criminal records</li></ul> This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters International Services Designated Activity Company Employment Type: Permanent Experience Level: Professional Job Family: Customer Eng.&amp;Technical Support&amp;Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to <a href="mailto:emsom@airbus.com" target="_blank">emsom@airbus.com</a>. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

194 Technical and engineering Not specified Jobs